Handlebar Switches - Yamaha FAZER FZ6-SV 2006 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
system keys may cause signal interfer-
ence, which may prevent the engine
from starting.
2. If the engine starts, turn it off, and
try starting the engine with the
standard keys.
3. If one or both of the standard keys
do not start the engine, take the
3
vehicle, the code re-registering
key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
If the multi-function display indicates
any error code, note the code number,
and then have a Yamaha dealer check
the vehicle.
CAUTION:
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.

Handlebar switches

Left
1. Pass switch " "
2. Dimmer switch "
3. Turn signal switch "
4. Horn switch " "
5. Hazard switch " "
ECA11590
EAU12344 Right
1. Engine stop switch "
2. Start switch "
/ "
Pass switch "
/ "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
3-8
/ "
"
EAU12350
"
EAU12400
/ "
" for the high
" for the low beam.
EAU12460
/ "
". To signal a left-hand
". When re-