Table of Contents
Advertisement
Special conditions for safe use
3
Use the calibrator only as described in this technical manual.
•
The battery should only be charged in a safe area, using the charger provided. To avoid explosion or fire, use
•
only the battery (BT15-IS) and charger (CG15-IS) specified by Presys.
Never replace the battery in a hazardous area.
•
Do not use the serial communication port in an explosive atmosphere.
•
The calibrator's aluminum metallic enclosure is protected by a leather case (BC15-IS) that should always house
The calibrator's aluminum metallic enclosure is protected by a leather case (BC15
The calibrator's aluminum metallic enclosure is protected by a leather case (BC15
•
it when in a hazardous area.
The intrinsic safety of the instrument is only valid for the connections shown in this
The intrinsic safety of the instrument is only valid for the connections shown in this
The intrinsic safety of the instrument is only valid for the connections shown in this manual, respecting the
•
intrinsically safe input and output parameters.
intrinsically safe input and output parameters.
intrinsically safe input and output parameters.
To avoid damage to the instrument and invalidate the Ex certification, never apply a voltage greater than 30 V
To avoid damage to the instrument and invalidate the Ex certification, never apply a voltage greater than 30 V
To avoid damage to the instrument and invalidate the Ex certification, never apply a voltage greater than 30 V
•
between the terminals and the metallic enclosure of the instrument.
between the terminals and the metallic enclosure of the instrument.
between the terminals and the metallic enclosure of the instrument.
Never open the calibrator. Opening the enclosure may void the calibrator Ex certification.
r open the calibrator. Opening the enclosure may void the calibrator Ex certification.
r open the calibrator. Opening the enclosure may void the calibrator Ex certification.
•
Do not use tools on the calibrator that may cause sparks; this practice can cause an explosion.
Do not use tools on the calibrator that may cause sparks; this practice can cause an explosion.
Do not use tools on the calibrator that may cause sparks; this practice can cause an explosion.
•
Never perform maintenance on the calibrator; the components used are spec
Never perform maintenance on the calibrator; the components used are spec
Never perform maintenance on the calibrator; the components used are specified and cannot be changed.
•
Never use the calibrator in an area close to explosive dust.
Never use the calibrator in an area close to explosive dust.
Never use the calibrator in an area close to explosive dust.
•
should only be charged in a safe area, using the charger provided. To avoid explosion or fire, use
should only be charged in a safe area, using the charger provided. To avoid explosion or fire, use
IS) specified by Presys
IS) specified by
Presys. .
in an explosive atmosphere.
in an explosive atmosphere.
Advertisement
Table of Contents
