Full Hart ® Communicator (Fh Option) - Presys FCY-15-IS Technical Manual

26
Note: CHECK and D/A AUTO TRIM functions can only be used when the FCY-15-IS is connected to a single HART CHECK and D/A AUTO TRIM functions can only be used when the FCY CHECK and D/A AUTO TRIM functions can only be used when the FCY
with address 0, with the mA input + HART
2.5.6. Full HART
If the Full HART
device is automatically found, , and the screen shows the basic, device is automatically found device is automatically found, and the screen shows the basic, universal, and specific parameters (DD library).
To start the HART To start the HART To start the HART
FCY-15-IS will show the message Reading device information. Please wait... will show the message Reading device information. Please wait.. will show the message
Fig. 15 - Checking / Adjusting the mA Output of the HART Checking / Adjusting the mA Output of the HART Checking / Adjusting the mA Output of the HART
® ® ®
mA input + HART mA input + HART connection type, since the configurator must measure the current. connection type, since the configurator must measure the current. connection type, since the configurator must measure the current.
Communicator (FH option) Communicator Communicator (FH option) (FH option)
®
HART HART ® ® ® CONFIGURATOR option is enabled, the FH Software is launched. For this option, the CONFIGURATOR CONFIGURATOR option is enabled
and the screen shows the basic,
® ® ® configurator you should wait the FCY configurator you should wait the FCY configurator you should wait the FCY-15-IS to read the device parameters. The
Reading device information. Please wait..
option is enabled
Transmitter
®
®
instrument