Next HARTFORD 749841 Assembly Instructions

Tools Needed

Helpline
If you have any problem with this product or
require any replacement parts, please contact
Customer Services Tel: 0844 844 8999

Important

* We suggest you spend a short time reading this leaflet and then follow the simple step-by step instructions.
* Carefully check that you have all the parts before beginning assembly.
* Keep fittings out of childrens reach and keep children well away from construction area.
* We suggest you retain these instructions for future reference.
* A minimum of two persons are required to hang the mirror.
* Always ensure intended wall area to be drilled is free from any hidden electrical wires, water and gas pipes.
* Please use suitable wall fixings for your wall type
* BS7449: 1991
Name and Address: NEXT RETAIL LTD. LE19 4AT
Identification and model Number: 749841 HARTFORD MIRROR
Date of Manufacture: 02/2013
Contract number: IM1912294 IM6852058
Nominal thickness of Glass: 3 mm, Annealed glass does not conform to BS6206
Country of Origin:China
If a glass component is chipped or broken, replace with glass of the type described on this label.
Consult with the retailer with regard to obtaining a manufacturing specification and shape for replacement
glass quoting the model number, batch number and date of manufacture.
* Not suitable for use in bathrooms.

Care Instruction

* Do not place very hot or very cold items against or in close proximity to glass surface.
* Do not strike the glass with hard or pointed items.
* When cleaning mirror glass, use a damp cloth or leather with washing-up liquid or a recommended mirror-cleaning
product. Do not use washing powders or any other substance containing abrasive since these substances
scratch the glass.
* Do not use wire between the two fixing brackets on the frame- only hang by screwing a permanent screw into a
secure wall (as outlined below)

Warning

We strongly recommend that a professional who has experience of fitting such items should install large mirrors.
Mirrors are heavy objects and your safety is dependant on the construction/strength of the wall to which it is attached.
We would recommend that the following methods be used to hang the mirror. N.B.- SCREWS & RAW PLUGS FOR
THE WALL ARE NOT INCLUDED.
At least two people are recommended to install the mirror.
Wall fixings must be used for stability on this item and for safety reason the mirror should not be left freestanding.
If you need to return this mirror, please use the packaging provided.

Step One

Mark the position of the fixings on the wall with the template provided in hardware package. Make sure the fixings are level on the
wall.
749841 HARTFORD MIRROR
Assembly Instructions
Please keep these instructions for future reference.
1 of 2