TQB 2004T Manual

Periodic maintenance is essential for the efficient operation of Air/Hydraulic Truck Jacks. Lack of lubrication can
cause severe wear, premature failure, and or additional strain on the Air motor/Pump.
We recommend the steps outlined below should be part of a minimum 3-month
regular service depending on your frequency of use.

Lubrication Instructions

1. Air motors require a minimum of 20 ml of a suitable lubricant such as SAE 32 Grade
Hydraulic Oil or Air Tool Lubricant at weekly intervals dependant on usage where
daily/constant use may require lubrication to occur more frequently, please apply
directly into the air trigger mechanism air supply coupling.
2. Rear "non load bearing wheels" and axles should be lubricated with a Light Bearing
Grease or 30/40W Machine Oil to ensure long life, prevent premature wear and
provide smooth rotation.
3. Lubricate handle socket pivots and positioning locking pin with a Light
Bearing Grease to provide smooth operation from vertical to
horizontal positions.
4. Lubricate with a Light Bearing grease the release knob and locking pin
handle assembly with 30w/40w oil.
Truck Jack Air/Hydraulic
Lubrication Guide
Product Codes:
2004T B2003T BTJ35TA BTJ50TA
www.tqbbrands.com.au Sept21