Advertisement
Table of Contents
Periodic maintenance is essential for the efficient operation of Manual and Air over Hydraulic operated Presses.
Lubrication Instructions
1. Pivots and pins in all manual pump mechanisms should be lubricated with a Light Bearing Grease or 30/40W
Machine Oil to ensure long life and prevent premature wear.
2. Bed load bearing surfaces should be lubricated with a Light Bearing Grease or
30/40W Machine Oil to ensure long life and prevent premature wear.
3. Bed winch pulleys should be lubricated with a Light Bearing Grease or 30/40W Machine Oil to ensure smooth
operation, long life and prevent premature wear.
4. Periodically extend, clean, and lubricate the ram shaft with silicone lubricant spray to ensure smooth
extension and retraction of the ram.
Press
Lubrication Guide
Product Codes:
1187T BHSP20T BHSP30T
www.tqbbrands.com.au
May21
Advertisement
Table of Contents
Related Manuals for TQB BHSP20T
Summary of Contents for TQB BHSP20T
- Page 1 Press Lubrication Guide Product Codes: 1187T BHSP20T BHSP30T Periodic maintenance is essential for the efficient operation of Manual and Air over Hydraulic operated Presses. Lubrication Instructions 1. Pivots and pins in all manual pump mechanisms should be lubricated with a Light Bearing Grease or 30/40W Machine Oil to ensure long life and prevent premature wear.
- Page 2 5. Lubricate the bed pins and upright positioning holes periodically to ensure easy bed height readjustment. 6. Lubricate the safety guard latches periodically to ensure easy guard height readjustment. 7. Lubricate Winch mechanicals including Gears, Axle Rods and Ratchet Assemblies. www.tqbbrands.com.au May21...
Need help?
Do you have a question about the BHSP20T and is the answer not in the manual?
Questions and answers