Maintenance And Repair - Bear DHG-C60F2 User Manual

Maintenance and repair

1.Before cleaning and maintenance, be sure to pull out the power plug, and
wait for the body to cool down before cleaning.
2.Add a small amount of clear water and detergent to the pot, and scrub the
inner surface of the pot with a soft cloth or sponge. After wiping clean, pour
out the pot washing water, and then wash the inner surface of the pot with
clean water until it is clean. Pour out the water in the pot, and wipe it with a
wrung-dry cloth. Do not clean the outer surface of the product directly with
water. As shown in the figure:
3.Do not use gasoline, scouring powder, hard brush or stainless steel wire ball
to wipe, so as to avoid damage to the surface.
4.Do not put the whole machine in water for cleaning. The outer surface of the
electric hot pot can be wiped with a wet towel. Do not rinse with water, so as
to avoid electric leakage and malfunction.
5.It is a normal phenomenon that white marks appear on the pot bottom after
heating. Please rest assured to use the product. Add a proper amount of
vinegar to clean the marks.
6.When the product is not used for a long time, please clean it, put it in the
packing box, and place the box in a ventilated and dry place, so as to avoid
being affected with damp. Otherwise, use will be affected.
13