Do you have a question about the SJJ-R03B5-WHITE and is the answer not in the manual?
Questions and answers
Faith Williams
March 5, 2025
Hi
My bear food maker is not working I try streaming it for the first time it only saying water sign.
The lid and everything is in correctly
2 comments:
Mr. Anderson
March 5, 2025
The Bear SJJ-R03B5-WHITE food maker may be displaying a water sign and not working due to scale buildup in the water tank. Regular descaling is recommended to prevent this issue. To descale, mix 20mL white vinegar with 40mL water, pour it into the tank, and run the steam function. Let the solution sit for 30 minutes, then rinse the tank twice with clean water and wipe it with a soft cloth.
This answer is automatically generated
Faith Williams
March 6, 2025
@Mr. Anderson Hi
It's a new bear food maker I purchased
Only received it two days ago.
And I try putting in on to steam and the sign water only coming up..
It only blending that's all
Diana
April 4, 2025
Does the blender lid come apart for cleaning
1 comments:
Mr. Anderson
April 4, 2025
Yes, the Bear SJJ-R03B5-WHITE blender lid comes apart for cleaning. You can disassemble it by inserting the spatula into the hole on the top lid and rotating to separate the top lid from the inner lid.
This answer is automatically generated
Roksana
April 2, 2025
Hello. Can you use the blend or steam functions independently? For example, if I only want to steam a vegetable but not blend it or blend a fruit but not steam it. If possible, please let me know how to do so. Thank you.
1 comments:
Mr. Anderson
April 2, 2025
Yes, the Bear SJJ-R03B5-WHITE can be used for blending and steaming functions independently. The device has separate buttons and settings for each function, allowing users to steam or blend as needed.
This answer is automatically generated
Mikah
March 23, 2025
The Baby Food maker will not turn on. It had just finished steaming. Checked plug in, checked cord, everything was as it’s suppose to be. Changed to different wall plug and still no power. This was the first time using it.
1 comments:
Mr. Anderson
March 23, 2025
The Bear Baby Food Maker SJJ-R03B5-WHITE may not be turning on after steaming because of its security locks. The machine will only power on if the blender cup and lid are properly installed in place. Additionally, check if the water tank has boiled dry, as the "Lack water" indicator may turn on, preventing operation. Ensure all parts are correctly assembled and that there is sufficient water in the tank.
This answer is automatically generated
Obrad Rankovic
February 15, 2025
Hello!
We wanted to use the steam function for the first time as instructed in the manual, but it doesn't work. The water in the tank is poored to the maximum level, steam function counts down 25 minutes, but there is no steaming, and the water remains cold.
Please help!
1 comments:
Mr. Anderson
February 15, 2025
The steam function may not be working because the blender cup and lid are not properly installed. The Bear SJJ-R03B5-WHITE is equipped with security locks that prevent the machine from powering on unless both the blender cup and lid are correctly in place. Ensure they are securely installed before attempting to use the steam function.
This answer is automatically generated
Donna Witt
January 17, 2025
When making meat or fish purée do you use raw meat/fish?
1 comments:
Mr. Anderson
February 3, 2025
YES. Raw meat or fish can be used with the Bear SJJ-R03B5-WHITE when making purée, as the device includes a steaming function to cook ingredients before blending. However, it is recommended to thaw the ingredients in advance for better results.
This answer is automatically generated
Sam
June 27, 2025
Bear food maker stopped blending. How to fix it?
Sydney
February 9, 2025
When making pureeing cooked beans do they need to be cooled down first
Page 1
Model: SJJ-R03B5-WHITE Baby Food Maker Veggie Fish Fruit Meat Lack water Steam Function Self- Blend Clean User Manual Thank you for your purchase. Please read this manual thoroughly before use and keep in a safe place for future references.
IMPORTANT SAFEGUARDS 1. Please read this manual carefully before use to avoid improper use of the appliance. 2. Make sure that the voltage range is consistent with that marked on the nameplate before use and the socket is properly earthed. 3.
Page 3
CONTROLS/FUNCTIONS Veggie Fish Fruit Meat Lack water Function Steam Self- Blend Clean Icon Function Description 1. Press this key once to start the function so that the corresponding indicator light is on and the time is displayed for 10 minutes. 2.
Page 4
1. Press this key once to start the function so that the corresponding indicator light is on and the time is displayed for 20 minutes. 2. If there is no other operation within 3 seconds, the product Fruit starts to work. 3.
Used to automatically clean the stirring cup and blades for 10 minutes. The cleaning time cannot be adjusted. Press this key once to start the function so that the corresponding indicator light is on. Note: Self-Clean 1) When you select this cleaning function, 100ml water needs to be added to the stirring cup.
Note: ① Check the package for obvious damage before use. ② Please contact after-sales customer service if the product is damaged due to damaged packaging or improper transportation. ③ Keep children away from packaging materials. CLEANING & MAINTENANCE 1. It is recommended to clean the appliance after each use. 2.
Page 7
Disassembly Insert the spatula into the hole on the top lid, then rotate the spatula to separate the top lid from the inner lid. Note: Please be careful not to hurt your hand when you open it with your bare hands. It is recommended to use the spatula.
Page 8
DISASSEMBLY AND ASSEMBLY INSTRUCTIONS FOR CUTTER ASSEMBLY Driving head Seal ring Blade Blade holder Disassembly 1. Lift up four blades and take them out of the stirring cup. 2. Put the stirring cup upside down. Reach into the cup with your left hand to hold the driving head.
Page 9
3. Take the driving head out of the stirring cup and remove the seal ring. Assembly 1. Put the seal ring on the cleaned drive assembly. When assembling, be careful not to reverse the direction (as shown in Figure 1). The seal ring is located in the circle close to the driving head, as shown in Figure 2.
3. Finally, put the cutter assembly into the cup (as shown in Figure 5) so that the drive assembly is aligned with the hole at the bottom of the cutter assembly. Rotate the cutter handle counterclockwise to ensure that the cutter assembly is installed in place, and then cover the cup lid until the shaft at the top of the cutter assembly is aligned with the rotating shaft hole at the bottom of the cup lid (as shown in Figure 6).
(BPA/lead/phthalates/odor/latex/petroleum free) WARRANTY & CUSTOMER SERVICE Bear offers 1-year warranty and 24-hours customer service. When you receive the product, please check it as soon as possible and keep its original box. If you are in any way dissatisfied with this product, please contact official customer service or email to Bearwarranty@bears.com.cn, we will solve your...
Need help?
Do you have a question about the SJJ-R03B5-WHITE and is the answer not in the manual?
Questions and answers
Hi My bear food maker is not working I try streaming it for the first time it only saying water sign. The lid and everything is in correctly
The Bear SJJ-R03B5-WHITE food maker may be displaying a water sign and not working due to scale buildup in the water tank. Regular descaling is recommended to prevent this issue. To descale, mix 20mL white vinegar with 40mL water, pour it into the tank, and run the steam function. Let the solution sit for 30 minutes, then rinse the tank twice with clean water and wipe it with a soft cloth.
This answer is automatically generated
@Mr. Anderson Hi It's a new bear food maker I purchased Only received it two days ago. And I try putting in on to steam and the sign water only coming up.. It only blending that's all
Does the blender lid come apart for cleaning
Yes, the Bear SJJ-R03B5-WHITE blender lid comes apart for cleaning. You can disassemble it by inserting the spatula into the hole on the top lid and rotating to separate the top lid from the inner lid.
This answer is automatically generated
Hello. Can you use the blend or steam functions independently? For example, if I only want to steam a vegetable but not blend it or blend a fruit but not steam it. If possible, please let me know how to do so. Thank you.
Yes, the Bear SJJ-R03B5-WHITE can be used for blending and steaming functions independently. The device has separate buttons and settings for each function, allowing users to steam or blend as needed.
This answer is automatically generated
The Baby Food maker will not turn on. It had just finished steaming. Checked plug in, checked cord, everything was as it’s suppose to be. Changed to different wall plug and still no power. This was the first time using it.
The Bear Baby Food Maker SJJ-R03B5-WHITE may not be turning on after steaming because of its security locks. The machine will only power on if the blender cup and lid are properly installed in place. Additionally, check if the water tank has boiled dry, as the "Lack water" indicator may turn on, preventing operation. Ensure all parts are correctly assembled and that there is sufficient water in the tank.
This answer is automatically generated
Hello! We wanted to use the steam function for the first time as instructed in the manual, but it doesn't work. The water in the tank is poored to the maximum level, steam function counts down 25 minutes, but there is no steaming, and the water remains cold. Please help!
The steam function may not be working because the blender cup and lid are not properly installed. The Bear SJJ-R03B5-WHITE is equipped with security locks that prevent the machine from powering on unless both the blender cup and lid are correctly in place. Ensure they are securely installed before attempting to use the steam function.
This answer is automatically generated
When making meat or fish purée do you use raw meat/fish?
YES. Raw meat or fish can be used with the Bear SJJ-R03B5-WHITE when making purée, as the device includes a steaming function to cook ingredients before blending. However, it is recommended to thaw the ingredients in advance for better results.
This answer is automatically generated
Bear food maker stopped blending. How to fix it?
When making pureeing cooked beans do they need to be cooled down first