Defrost Button; Cleaning And Care - Electrolux ETS 3100 Manual

SWITCHING ON (Figure 4)
Plug the mains plug into the
mains socket.
Insert bread for toasting.
Select the browning setting and press
down the start lever.
When the required degree of browning
has been reached, the toaster switches
off automatically; the slices of toast
are lifted up ready for removal. By lifting
the start lever (bread lift function)
the toasted bread can be lifted
sufficiently such that it is easy to
remove (Figure 5).
ADJUSTING THE BROWNING
SETTING (Figure 2)
Using the slide switch you can continuously
adjust the browning setting from 1-7 as
required. Setting 1 for lightest browning.
Setting 7 for darkest browning.
Use a setting between 1 and 3 when you
first start toasting. If the toast is not
browned to your liking, set the adjuster
lower or higher, higher for example when
toasting rye or dark bread. When toasting
only 1 slice and also when toasting bread
that is no longer fresh, use a slightly lower
browning setting.
We would recommend to adjust a
setting that the toast is browned to a
golden yellow or light-brown colour.
The electronic toasting time regulator
ensures that once a browning setting
has been chosen, the results are
always the same for the same type
of bread.
STOP BUTTON (Figure 2)
If you want to interrupt toasting, press
the stop button. The appliance switches
off. Once chosen, the browning setting
remains unchanged.

DEFROST BUTTON

Also press the defrost button when
toasting frozen bread. This lengthens
the toasting time.
10
6
WARM UP BUTTON
To warm up toasted bread also press the
warm up button to keep the toast warm
and crisp.
ROLL RACK (Figure 6a, 6b, 6c)

Cleaning And Care

(Figure 7)
(Figure 2)
(Figure 2)
Your appliance is equipped with a
built-in roll rack.
Due to the nature of the function of
the appliance, the roll rack will be come
hot during toasting, therefore never
touch the metal parts.
The roll rack can be activated by
turning the roll rack button
clockwise (Figure 6a).
Place rolls or other bread for crisping
on the rack, and slide the browning
control to the required browning setting
(Figure 6b).
Switch on the toaster using the start
lever (Figure 6c).
When the toaster has switched off,
turn the bread. Repeat the process.
Never place rolls or bread directly on
the toasting slot.
Turn the roll rack button counter –
Clockwise so that the rack goes
downwards.
Before cleaning, always unplug and
leave the toaster to cool down.
Crumbs dropping from the bread
during toasting collect in the crumb
drawer.
Pull out to the side and remove the
crumbs.
Do not use caustic or abrasive cleaners
to clean the appliance. Only clean the
housing with a dry or slightly moist
cloth.
Liquid must not be applied to the
toaster, the toaster must also never be
immersed in liquid.