Table of Contents
Advertisement
When you switch the system on and it
detects an unintentional drift out of your
lane is likely to occur, the system notifies
or assists you to stay in your lane through
the steering system and information
display. The system provides a warning by
an audible tone.
Switching the System On and Off
Note: The system on or off setting is stored
until it is manually changed, unless a MyKey
is detected. If the system detects a MyKey,
it defaults to on and the mode is set to alert.
Note: If a MyKey is detected, pressing the
button does not affect the on or off status
of the system. You can only change the
mode and sensitivity settings.
Press the button to switch the
system on or off. The button is
above the audio unit or on the
E173233
center console.
System Settings
The system sensitivity and intensity can
be adjusted through the display screen.
See General Information (page 65). The
system remembers the last selection. You
do not need to readjust the setting each
time you turn on your vehicle.
Sensitivity: This setting allows you to
select where in the lane a warning is
provided. Increasing the sensitivity setting
moves the warning zones in closer to your
vehicle.
2023 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202111, First-Printing
Driving Aids
E165517
A
B
Note: The alert diagram illustrates general
zone coverage. It does not provide exact
zone parameters.
System Display
E233874
When you switch on the system, a graphic
with lane markings appears in the display
screen.
Note: The overhead vehicle graphic may
still display if adaptive cruise control is
enabled.
While the system is on, the color of the
lane markings change to indicate the
system status.
117
Normal
Increased
Advertisement
Table of Contents
