Aerial amplifier, 4 way
Art.no 18-8012
38-2334
Please read the entire instruction manual before use and save it for future
reference. We reserve the right for any errors in text or images and for
making any necessary technical changes to this document. If you should
have any questions concerning technical problems please contact our
Customer Services.
Safety
•
The aerial amplifier must only be used indoors and must not be
subjected to damp.
•
Do not open cover. Certain product components under the cover are
unprotected and live. Contact with these may cause electric shock.
Product description
•
Aerial amplifier with one input and four outputs.
•
Adjustable amplification.
•
75 Ohm in- and output
•
HF sealed
Installation
1. Connect the incoming cable from the aerial to the input marked ANT
on the aerial amplifier.
2. Connect the TV output (TV1) to the TV set. All four TV outputs may
be used simultaneously for several TV sets (cables and contacts not
included).
3. The amplification is adjusted using the control above the aerial input.
Turn the control clockwise to increase the amplification.
Responsible disposal
This symbol indicates that this product should not be disposed
of with general household waste. This applies throughout
the entire EU. In order to prevent any harm to the environment
or health hazards caused by incorrect waste disposal,
the product must be handed in for recycling so that the material
can be disposed of in a responsible manner. When recycling
your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
Voltage
Amplification
Frequency range
customer service tel: 020 8247 9300
e-mail customerservice@clasohlson.co.uk
internet www.clasohlson.co.uk
Model AM4069AGL-UK
AM4069AGL
230–50 V AC, 50 Hz
20 dB × 4, adjustable ± 10 dB
40–790 MHz (channel 2–60)
On/off switch