Clas Ohlson AN-4055-UK Manual

Indoor Aerial
Art.no 18-8283 Model AN-4055-UK
38-4721 AN-4055
Please read the entire instruction manual before use and save
it for future reference. We reserve the right for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
Warning: This aerial is for indoor use only.
Product description
Built-in amplifier for VHF channels 5–12 and UHF channels
21–60. Good reception capabilities under favourable reception
conditions. Comes with mains adaptor and 180 cm coaxial
cable.
Contents
• Table stand
• Wall bracket
• Wood screws
• AC/DC mains adaptor
• Aerial lead
Wall mounting
1. Screw two wood screws
into the wall, 80 mm apart.
2. Fit the plastic
bracket onto
the back of
the aerial.
Slide the bracket
upwards to lock
it into place.
GREAT BRITAIN • customer service tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
3. Hang the aerial
onto the wall by
passing the holes
in the bracket
over the screws.
Table placement
Horizontally: Standing the aerial Vertically: Standing
in a horizontal position. the aerial in a vertical
position.
Operation
1. Connect one end of the provided coaxial aerial lead to your
indoor aerial and the other end to the aerial input socket on
your TV or digital box.
2. Most digital terrestrial TV receivers/decoders can supply
aerials with power via their aerial output socket. In order
to do this, the power supply function must be activated in
the digital receiver's menu. It is often called "Aerial/antenna
power" or "5 V".
3. Connect your digital receiver to your TV using a SCART lead
or a coaxial cable (sold separately).
Digital receiver
Aerial lead
4. If you have a digital receiver which is not capable of
supplying the aerial with 5 V DC/30 mA power you should
use the mains adaptor.
Mains adaptor 230 V, 50 Hz, 6 V DC/100 mA
NOTE: If you are unsure whether or not the digital receiver/
decoder can supply the aerial with power you can still try
using the mains adaptor. The mains adaptor will not damage
the aerial or the digital receiver/decoder.
Care and maintenance
Clean the product by wiping it with a soft dry cloth.
Never use solvents or abrasive cleaning agents.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.
Specifications
Reception Digital terrestrial TV signal (DVB-T)
and DAB
Frequency range VHF 174–230 MHz
TV
UHF 470–790 MHz
VHF: 15 dB, UHF: 15 dB
Amplifier gain
Mounting Vertical or horizontal
Mains adaptor 230 V 50 Hz / 6 V DC 100 mA
Aerial lead IEC male-male, straight
and 90° angled plug ends