Installation Complete - Monster iCruze MPC FX IC-AUD1 Installation & User Manual

black wire that needs to be connected to ground (shown in box).
Locate a suitable ground location and connect to ground.
Step 6
Step 6
The Interface Cable IC-AUD1
has three plastic connectors
on it. The smallest male connector
plugs into the other side of the Interface
Module IM-VW1 (non-round plug side).
Step 7
This leaves you with two
Step 7
plastic connectors on
the Interface Cable IC-AUD1
that look nearly identical
but one is male and the other
female. The male connector
plugs into the back of the
factory stereo. However,
you must first unplug
the cable that is already
there. Unplug this connector and insert it into the matching female
connector on the Interface Cable IC-AUD1. Take the remaining male
connector on the Interface Cable IC-AUD1 and plug it into the back
of the stereo.

INSTALLATION COMPLETE

Refer back to the installation guide that came with iCruze
®
to complete your iCruze installation and for more details
on using iCruze functions and features.