Xqisit xqB20 - Bluetooth Pocket Speaker Manual

Buttons

In Bluetooth mode

1. Play/Pause (Press short)
   Enter pairing mode (Press and hold)

In general operating mode

2. OFF ←→ Line-in ←→ Bluetooth
3. Line out jack
4. USB charging port
5. Twist to release line out cable

Line-in mode

• Slide the Button "B" into the Line-in mode; LED will light up
• Plug the Built-in Cable into the Music device and play the music (F)
  

Series connection

• Put the second speaker into Line-in mode (B), and connect to the Line-out jack of first speaker (C)
• Play music from your Music device on the first speaker; both speakers will sound out at the same time (G)
  

Bluetooth mode (Pairing mode)

• Select a Bluetooth 2.1 or above device and turn on Bluetooth connection
• Activate the searching mode on your Bluetooth device
• Slide the Button "B" to the Bluetooth mode; LED will light up
• Press and hold Button "A" until the indicator flashing in Blue, xqB20 has 3 mins for your Bluetooth device to pair with.
• <<xqB20 >> will be displayed on your Bluetooth device for pairing. "0000" is the pairing code if necessary.
• Beep sound will be given when xqB20 is successfully paired; the LED stops flashing

Remark: Pairing steps are for 1st time connection, automatic reconnection is allowed on most Bluetooth devices

Charging your Speaker

Charge up xqB20 whenever it is needed by connecting to a suitable wall charger (not included) or by computer via the USB cable (D)

Remark: Fully charge xqB20 at least once a month

Front Logo Light indicator

(H) Power Off - LED off

(I) Power Off, fully charged - LED off

(J) Power Off, charging - LED red

(K) Power On, charging - LED purple

(L) Power On - LED blue

(M) Pairing mode - LED flashing blue

(N) Pairing mode, charging - LED flashing purple and red

Specifications

• 55mm Patented Coaxial driver with integrated Radiator delivers superb music fidelity
• RMS Output is 4.5 W
• Frequency response: 150 – 16kHz
• Sensitivity: -34 ± 3dB
• Li-ion battery: 500mAh
• Playtime: 3 hours at 70% Volume
• Recharging Time: 2 hours

Bluetooth Compatibility

Bluetooth 2.1 or above device with A2DP / AVRCP / HFP / HSP

Trouble Shooting

Sound not clear or no sound

→ Please check Bluetooth device volume level

Playing music is not transfered from Bluetooth device to xqB20

→ Make sure your Bluetooth device supports A2DP

→ Check if both devices are connected

→ Restart xqB20 for auto connection with your Bluetooth device No LED light

→ Make sure xqB20 is fully charged xqB20 is too quiet / too much distortion

→ Adjust the volume level of the music device

No music control by xqB20 possible

→ Make sure your Bluetooth device has AVRCP

Fire and Electric Shock Hazard

• Do not expose your xqisit xqB20 to liquid, moisture, humidity, or rain. Do not use the xqisit xqB20 near a bathtub, sink, sauna, pool, or steam room. Exposure of the xqisit xqB20 to moisture could result in electric shock.
• Do not place any items filled with liquids, such as glasses, vases or similar objects, on top of the device.
• Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects in to the xqisit xqB20. Such actions could result in electric shock.
• Clean the xqisit xqB20 only with a dry cloth.
• Do not expose your xqisit xqB20 to extremely high or low temperatures.
• Do not expose your xqisit xqB20 to sources of excessive heat, such as sunlight, fire or similar. Do not place your xqisit xqB20 near an open fire, such as gas burners, candles or fireplaces, and avoid contact with direct solar radiation. Do not place any candles or other open flames on the device. Make sure that the xqisit xqB20 is exposed to sufficient ventilation. Do not block the vent holes with objects such as magazines, tablecloths or similar items.

Battery/Charger Hazard

• Do not dispose of your xqisit xqB20 in a fire. The battery could explode causing injury or death.
• Only charge the battery in accordance with the user instructions supplied with the xqisit xqB20.
• Do not attempt to disassemble the xqisit xqB20 or force open the built-in battery because this may result in electric shock.
• Do not charge the xqisit xqB20 in damp areas or in extremely high or low temperatures because this could result in electric shock.
• Do not clean the xqisit xqB20 when it is being charged. Always unplug the charger first before cleaning the Xqisit xqB20.
• Set up the device in such a way that the mains plug is always easily accessible and you can unplug it quickly in the event of an emergency.

Automobile Accident Hazard

• Do not leave or store the xqisit xqB20 or any of its accessories near or over your automobile's air bag because serious injury may result when an airbag deploys.

Fall Hazard

• Do not place the xqisit xqB20 on high surfaces such as shelves. During music playback the xqisit xqB20 may move which could cause the xqisit xqB20 to shift and fall off of the edge.

• Do not use abrasive cleaners to clean your xqisit xqB20 because this could cause scratches and damage.
• Do not bring your xqisit xqB20 in to contact with any sharp objects because this could cause scratches and damage.
• Do not insert anything into your xqisit xqB20 unless other wise specified in the user instructions. This may damage the internal components.
• Do not attempt to repair, modify, or disassemble your xqisit xqB20 yourself, it does not contain any user-serviceable components.
• Do not attempt to replace your xqisit xqB20 battery, it is built-in and is not changeable.
• Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas.
• Turn off your xqisit xqB20 prior to boarding an aircraft. Do not use the xqisit xqB20 inside an aircraft unless allowed by your airline.
• Dispose of the xqisit xqB20 and the xqisit xqB20 's battery in accordance with local regulations. Do not dispose of the battery with regular household waste.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
• This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC ID: NKTPF319
To locate the FCC and IC identification numbers, please look on the underside of the xqisit xqB20
Model number PF319

The crossed-out wheelie bin symbol means that the product must be disposed of separately in the European Union. These products must not be disposed of with unsorted household waste.