Retro-Bit Sega Saturn - Wireless Receiver Manual

FEATURES

• Compatible with original SEGA Saturn® consoles.
• Functional with Retro-Bit® wireless controllers featuring Bluetooth® Technology.
• Pairs with original PS4®, Xbox One®, and Switch Bluetooth® controllers.
• Includes a pairing button and Micro USB® port to allow for firmware updates.
• Playable up to 30ft/10m in distance • Includes 9cm/ 3.5in Micro USB® cable.

CONNECTION

CONNECT WITH OFFICIALLY LICENSED SEGA® CONTROLLER

WITH BLUETOOTH® TECHNOLOGY BY RETRO-BIT®.

• With the controller turned off, press and hold the Home + C buttons to enter pairing mode. LED1 and LED4 will flash.
• Plug the receiver to the powered console and press the pairing button until synced.
• Once connected, the controller will vibrate and LED2 and LED3 will remain on.

CONNECT WITH PS4® CONTROLLER

• Press and hold the PS + Share buttons on the controller to enter pairing mode.
• Plug the receiver to the powered console and press the pairing button until synced.
• Once connected, the controller's LED light and the receiver's LED will remain on.

CONNECT WITH XBOX ONE® CONTROLLER

• Press the Guide button on the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and press the pairing button until synced.
• Once connected, the controller's LED light and the receiver's LED will remain on.

CONNECT WITH SWITCH PRO CONTROLLER

• Press the Home button the controller to power it on. Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and then press the pairing button until synced.
• Once connected, the controller's LED and the receiver's LED will remain on.

If you encounter any issues or require further support, visit: www.retro-bit.com/support

@retrobitgaming

For more information, please visit www.retro-bit.com