Sony DPF-D710 Service Manual page 10

– ENGLISH –
Set the destination when the MAIN PWB ASSY SERVICE was replaced.
The following procedures are used in DPF-D720 model.
Conduct the same adjustment for the other models.
2-1. HOW TO CHANGE THE DESTINATION
Procedure
1. Plug the AC adapter attached to the set into the DC IN 5V(DPF-
D710/D720/D810/D820) or 12V(DPF-D1010/D1020) terminal
on the rear panel of the set and insert the power cord into the socket.
Press the 1 (on/standby) button to turn off the power once.
(The power switch LED on the set changes from green to red.)
2. With the [VIEW MODE] button and [MENU] button pressed, turn
on the 1 (on/standby) button, and when the default setting
screen (Fig. 2-1-1) appears, release the [VIEW MODE] button and
[MENU] button.
Model: D720 D720SW
Destination: J1 U2 CA2 CEK
CED CEP CEU E37
E33 E32 AU3 JE3
KR2 CN9 TW6 HK4
AR2
BR4 E35
XXXXXXXXX XXXXXXXXX - X
Restore all setting
Fig. 2-1-1
3. Check that the model name displayed on the side of "Model"
name meets the following:
D710 : DPF-D710
D720 : DPF-D720
D720 SW : DPF-D720 (CRYSTAL & BLACK,
CRYSTAL & WHITE)
D810 : DPF-D810
D820 : DPF-D820
D1010 : DPF-D1010
D1020 : DPF-D1020
Note:Using [B] [b] buttons, move a yellow frame to the model
name to be set.
4. Red characters of "Destination" show default setting of this set.
(Fig. 2-1-1 shows that the destination has been set to J1)
Using [V] [v] [B] [b] buttons, move a yellow frame to the
destination to be set. (Fig. 2-1-1 shows that U2 has been selected as
destination.)
DPF-D710/D720/D810/D820/D1010/D1020
5. Press the [ENTER] button, and the characters will change to red,
indicating that the selected destination was set. (Fig. 2-1-2)
Model: D720 D720SW
Destination: J1 U2 CA2 CEK
CED CEP CEU E37
E33 E32 AU3 JE3
KR2 CN9 TW6 HK4
AR2
BR4 E35
XXXXXXXXX XXXXXXXXX - X
Restore all setting
Fig. 2-1-2
6. With a yellow frame moved to "Restore all setting", press the
[ENTER] button. (Fig. 2-1-3)
Model: D720 D720SW
Destination: J1 U2 CA2 CEK
CED CEP CEU E37
E33 E32 AU3 JE3
KR2 CN9 TW6 HK4
AR2
BR4 E35
XXXXXXXXX XXXXXXXXX - X
Restore all setting
Fig. 2-1-3
7. The screen becomes green and the setting is complete. (Fig. 2-1-4)
Fig. 2-1-4
8. With green screen displayed, unplug the AC adapter from the DC
IN 5V (DPF-D710/D720/D810/D820) or 12V (DPF-D1010/D1020)
terminal.
9. Plug the AC adapter into the DC IN DC IN 5V (DPF-D710/D720/
D810/D820) or 12V (DPF-D1010/D1020) terminal and turn on the
power.
10. Press the [MENU] button to display the Settings menu, and select
"Initialize" to execute. (Fig. 2-1-5)
Settings
Slideshow Settings
Slideshow Sound Setting
Auto Power ON/OFF
Date/time Settings
General Settings
System Information
A Language Setting
Initialize
/ ENTER Select BACK End
Fig. 2-1-5
11. Select "Initialize settings" of "Initialize" to execute. (Fig. 2-1-6)
Initialize
Format internal memory
Initialize settings
/ ENTER Select BACK Return
Fig. 2-1- 6
12. Select "Yes" for the dialog message "All settings will be returned
to factory default." to execute. (Fig. 2-1-7)
All settings will be
returned to factory default.
Yes
No
Fig. 2-1- 7
– 10 –
13. Select "OK" for the dialog message "Completed" to finish all the
initialize settings. (Fig. 2-1-8)
Completed
OK
Fig. 2-1- 8
2-2. CONFIRMATION OF DESTINATION
1. Press the [MENU] button to display the menu, and if the language
you selected is set, the setting has been completed.