Installation; Control Panel - Electrolux EUF2205AOW User Manual

6 www.electrolux.com

3. INSTALLATION

WARNING!
Refer to Safety chapters.
3.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
3.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the

4. CONTROL PANEL

4.1 Switching on
1. Insert the plug into the wall socket.
2. Turn the temperature regulator
clockwise to a medium setting.
Power indicator and alarm lights will
illuminate.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
1 2
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
3.3 Installation of the appliance
and door reversal
Temperature regulator
1
3
Alarm light
2
Power indicator light
3
4.2 Switching off
To turn off the appliance, turn the
temperature regulator to
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
The power indicator light
remains switched on until
the appliance is
disconnected from the power
socket.
position.