Hardware - Home Decorators Collection HB1079-310D Use And Care Manual

Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or
removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing
the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
NOTE: Keep your receipt and these instructions
for Proof of Purchase.
TOOLS REQUIRED
Phillips
Screwdriver
5 Incandescent 60 W
Bulbs or CFL or
LED Equivalent
HARDWARE REQUIRED
NOTE: Hardware not shown to actual size.
AA
DD
Part Description
AA Decorative Nut
BB Washer
CC Hex Nut
DD Wire Nut
Flathead
Screwdriver
Ladder
BB
EE
Quantity
5
3
5
3
3
Wire
Cutter
Electrical
Tape
CC
FF
Part Description
EE Mounting Screw
FF Fixture Screw
GG Mounting Bracket
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Wire
Stripper
Safety
Goggles
GG
Quantity
2
2
1