Asus PRIME Intel 500 Series Manual page 23

CPU VRM Switching Frequency
This item allows you to set the VRM switching frequency. VRM switching frequency
affects transient response and VRM component temperatures. Configure a higher
switching frequency for better transient response at the expense of higher VRM
temperatures. Active cooling of the VRM heatsink is recommended when running high
CPU voltage and high load-line calibration values.
Configuration options: [Auto] [Manual]
DO NOT remove the VRM heatsink.
The following item appears when you set CPU VRM Switching Frequency to [Manual].
Fixed CPU VRM Switching Frequency(KHz)
Allows you to set the VRM switching frequency manually. The switching
frequency will affect the VRM transient response and the component thermal
production. Configure a higher frequency for a quicker transient respond speed.
Use the <+> and <-> keys to adjust the value.
Configuration options: [250] [300] [350] [400] [450] [500]
CPU Power Duty Control
Allows you to adjusts the duty cycle of each VRM phase based upon current and/or
temperature. Configuration options: [T.Probe] [Extreme]
[T.Probe]
[Extreme]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
CPU Power Phase Control
Allows you to set the power phase control of the CPU.
Configuration options: [Auto] [Standard] [Extreme]
[Standard]
[Extreme]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
CPU VRM Thermal Control
When this item is set to [Disabled], the temperature limit of the CPU VRM will be
increased. Configuration options: [Auto] [Disabled] [Enabled]
Internal CPU Power Management
The sub-items in this menu allow you to set the Internal CPU Power Managemnt features.
Use the <+> or <-> keys to adjust the value, or key in [Auto] and press the <Enter> key to
apply the optimized setting for each of the sub-items below.
PRIME / TUF GAMING Intel
https://tm.by
Интернет-магазин TM.by
Sets the buck controller to balance VRM FET
temperatures.
Sets the buck controller to balance per phase current.
The number of active phases is controlled by the CPU.
Sets to the full phase mode.
500 Series BIOS Manual
® 23