Advertisement
4|
Insert the panel into
the hole
6|
Use hex key no.3 to tighten
the clip
5|
Insert a clip into the groove
in the lower part of
the panel
For the desk height 10- 25 mm use upper groove,
for the desk height 24 - 42 mm use lower groove.
7|A
If you've chosen pullout for your panel,
place it on the lower part of the panel
next to a cartridge and move
it to the grooves
(in the arrow's direction)
8|A
Tighten the pullout's screws
into the panel
Advertisement
