Troubleshooting - LifeSource Premier Series Owner's Manual

TROUBLESHOOTING

If Water Has Bad Taste or Odor
1. Verify that the BYPASS valve is in the SERVICE position
If the bypass is partially opened, a cross-mixture of filtered and tap water will be
present.
2. Check Electrical
Verify that the valve is plugged in and the clock is running. If the clock is not
running, it may need a new motor or transformer (if using a 24-volt head). Always
check the transformer first.
Self-Cleaning Cycle is Running Continuously
If water continually flows from the rinse drain line, a cross-mixture of filtered and
tap water will be present. Immediately put the system in bypass and call LifeSource
Water at 800-334-5009. This may be a sign of a mechanical issue.
See Manual Rinse Instructions on Page 15 for more details.
System is Self-Cleaning at Undesirable Time
Reset self-cleaning timer.
See video instructions at
See Page 4 to view correct BYPASS position.
LifeSourceWater.com/customer-care.php
19