Table of Contents
Advertisement
Fix issues : Call and SIM issues
4.
Check if a
software update
5.
Reset
the phone.
Phone doesn't ring or ring loud enough
1.
Check your volume setting.
2.
Look for
in your
•
Open quick settings
calls.
•
Make sure your phone is set to
3.
Check that your
ringtone
4.
Is your phone connected with a
5.
If you're using a ringtone that you installed, try using a ringtone that came with the phone.
6.
Use
safe mode
to see if apps you installed are causing the issue and uninstall as needed. Begin with
application types like launchers, task killers, or anti-virus apps.
Can't answer ringing phone
1.
Clear the data
for the Phone app.
Touch & hold
Consistent busy signal
Outbound calls
1.
If you hear a fast busy signal when you call a number, all cellular circuits may be in use, preventing the
call from going through. Try calling again later.
2.
If you hear a fast busy signal every time you call the same number, your number may be blocked by an
app. Try calling from a different number.
Incoming calls
If you have a signal and can make calls, but callers tell you they consistently get a busy signal when calling
you, check that you haven't
Issues during calls
After each troubleshooting step, check to see if your issue is fixed.
Screen goes black
1.
If you are using a case, cover or screen protector, remove it and see if it was causing the issue.
2.
Check your
proximity
Dial a call and set the phone on a table (don't use speaker mode), then hold your hand over the
proximity sensor to see if you can turn the screen off and on.
3.
Use
safe mode
to see if apps you installed are causing the issue and uninstall as needed.
is available for your phone.
status
bar. If you see it:
and touch
screen calls
is not set to None.
Bluetooth
, then touch
> Storage & cache > Clear storage.
blocked their
sensor.
to turn Do Not Disturb off. Your phone will ring for incoming
at the appropriate times.
device? If so, all audio is routed to the Bluetooth device.
numbers.
194
Advertisement
Table of Contents
