ZyXEL Communications NBG6816 User Manual page 13

Table 1 Front Panel LEDs (continued)
LED COLOR
Internet White
Off
2.4G WLAN/WPS White
Off
Amber
Off
5G WLAN/WPS White
Off
Amber
Off
Figure 2 Rear Panel
Chapter 1 Introduction
STATUS DESCRIPTION
On The NBG6816 has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the connection is up.
Blinking The NBG6816 is sending or receiving IP traffic.
The NBG6816 does not have an IP connection.
On The NBG6816 is ready and the 2.4GHz wireless LAN is on, but is
not sending/receiving data through the wireless LAN.
Blinking The NBG6816 is sending/receiving data through the wireless
LAN.
The wireless LAN is not ready or has failed.
On WPS is enabled. The NBG6816 is in the process of firmware
upgrading, configuration restoring, or resetting.
Blinking The NBG6816 is negotiating a WPS connection with a wireless
client.
WPS is disabled.
On The NBG6816 is ready and the 5GHz wireless LAN is on, but is
not sending/receiving data through the wireless LAN.
Blinking The NBG6816 is sending/receiving data through the wireless
LAN.
The wireless LAN is not ready or has failed.
On WPS is enabled. The NBG6816 is in the process of firmware
upgrading, configuration restoring, or resetting.
Blinking The NBG6816 is negotiating a WPS connection with a wireless
client.
WPS is disabled.
LAN 1-4
NBG6816 User's Guide
13
WAN