Selecting A Supported Display Mode - Lenovo D32u-40 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is
normal and the image can be readjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
The monitor adopts Flicker-Free technology, which clears the eye visible flicker , brings
comfort viewing experience and preventing users suffer from eye strain and fatigue.
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-configured the system; preferably to 3840 x 2160 at 60 Hz, which
is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
640x480
640x480
720x400
800x600
800x600
1024x768
1024x768
1280x720
1280x800
1280x1024
1280x1024
1440x900
1600x900
1680x1050
1920x1080
1920x1200
2560x1440
3840x2160
3840x2160
Timing
60Hz
75Hz
70Hz
60Hz
75Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
30Hz
60Hz
Refresh rate(Hz)
Chapter 2.
2-6