Gigabyte R283-Z92-AAJ3 Manual page 40

4
7
• Lock the CPU by using a Torx T20 screwdriver to tighten screw.
• When installing the heatsink to CPU, use a Torx T20 screwdriver to tighten 6 captive nuts in
sequence as 1-6.
• The screw tightening torque: 13.5 ± 0.5 kgf-cm.
• To ensure the system operates properly, make sure the heatsink is seated on the processor
firmly.
5
System Hardware Installation
- 40 -
6
6 6
1 1
3 3
2 2
5 5
4 4
8