Gigabyte R283-Z92-AAJ3 Manual page 13

Storage
Š 12 x 2.5" Gen4 NVMe/ SATA/ SAS hot-swappable bays
(AAE1)
Š 12 x 2.5" Gen4 NVMe hot-swappable bays
Š 4 x 2.5" SATA/ SAS hot-swappable bays in rear side
NOTE: SAS card is required for SAS devices support
(AAE2) Š 8 x 2.5" Gen4 NVMe hot-swappable bays
Š 16 x 2.5" SATA/ SAS hot-swappable bays
NOTE: SAS card is required for SAS devices support
(AAE3)
Š 4 x 2.5" Gen4 NVMe/ SATA/ SAS hot-swappable bays
(AAJ3)
Š 20 x 2.5" SATA/ SAS hot-swappable bays
Š 4 x 2.5" SATA/ SAS hot-swappable bays in rear side
Š Broadcom SAS35x36R expander
Š Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
NOTE:
a) SAS card is required for SAS devices support
b) All devices are connected to SAS expander
c) Please select enterprise SATA devices for SAS expander system
(AAD1)
Š 16 x 2.5" SATA/ SAS hot-swappable bays
NOTE: SAS card is required for SAS devices support
SAS Š Depends on SAS Add-on card
(AAE1)
(AAE2)
(AAD1)
(AAE3)
Š Supported
(AAJ3)
RAID
Š Depends on SAS Card
(AAE1)
(AAE2)
(AAD1)
(AAE3) Š Depends on SAS Card
(AAJ3)
Hardware Installation
- 13 -