Table of Contents
Advertisement
Locking and Unlocking
The brake levers are equipped with an additional small rotating catch. When this is engaged
the brakes will be held in the ON position. Additionally, a lock can prevent the catch being released.
1 . To engage, the brake lever, the brake should be pulled with three fingers,
whilst using the index finger pull the catch to lock the brakes on.
This will hold the brake ON when the lever is released.
2 . Pull the brake levers to unlock the catch
3 . The brake catch can then be permanently locked with a key to prevent the brake being released.
When not sat on the seat, the rider must always engage the catches for both front and rear brakes.
7
Advertisement
Table of Contents
