Table of Contents
Advertisement
3. Charge Through AC Adapter
Plug the original adapter into the machine's
DC input port and you will see the battery
indicators on the screen blink.
Notes:
A. The battery is fully charged when all battery level segments stop blinking and remain solid.
After the battery is fully charged it is best to unplug the charging cables. The battery will
not over charge, but removing the cables is the best practice.
B. Usually, it takes around 7 hours to fully charge the battery using the AC power adapter.
C. When you charge your power station by the INPUT port, the PD 100W port can't be used
as an output
4. Charge Through Your Car
A. Plug the original car charger into the cigarette lighter socket of your 12V car, and then
plug into the DC input port of the machine.
B. The original car charger features a 10A protector tube to protect your car.
C. You will know the machine is being charged when the battery indicators blink.
Notes:
To avoid car battery power loss, you should charge this product through your car cigarette lighter
only when your car engine is started. This function is for 12V car ONLY.
Protection mode (DC Input)
A. Depending on your car model, it may not be fully charged.
B. Under-voltage protection: The power generator can't be charged if the voltage of your car is too low.
AC Adapter
3
Advertisement
Table of Contents
