Panasonic TX-24GW324 Operating Instructions Manual page 19

●
To reset the current [Viewing Mode] to the default
settings
[Factory settings] in [General settings]
(Settings Menu)
Sound
1
Display the menu and select
[Settings]
2
Select [Sound]
select
access
3
Select the item to adjust
select
access
Sound Mode
You can select your favourite mode for each input.
■
[User]:
Adjusts the sounds manually to suit your favourite
sound quality.
■
[Standard]:
Provides the suitable sound quality for all types of
scenes.
■
[Cinema]:
Improves sound quality for watching movies.
■
[Music]:
Improves sound quality for watching music videos,
etc.
■
[Game]:
Improves sound quality for playing games, etc.
■
[Speech]:
Improves sound quality for watching news, drama,
etc.
Other sound settings
■
[Bass]:
Adjusts level to enhance or minimise lower, deeper
sound output.
■
[Treble]:
Adjusts level to enhance or minimise sharper, higher
sound output.
select
access
■
[Surround mode]:
Selects surround sound settings.
■
[Headphones volume]:
Adjusts the volume of headphones.
■
[TV placement]:
Selects the TV position.
■
Advanced sound settings
Selects advanced sound settings.
[Auto volume levelling]:
Automatically regulates large sound level
differences between channels and inputs.
[Delta volume]:
Adjust the delta value for TV speaker volume.
Delta volume is available when the input source
is set to HDMI or Analogue sources and the Audio
out is set to TV speakers or HDMI sound system.
[Audio out]:
Selects the sound output to adjust volume.
[Clear Sound]:
If the sound from TV speakers is unclear due to
installation environment, On is recommended.
●
This function is effective only for the sound from
TV speakers.
[Digital out format]:
Selects the initial setting for audio tracks.
● Selectable options vary depending on the
country you select.
[Digital out levelling]:
Adjusts the loudness level from device which is
connected to digital audio output (SPDIF) or HDMI.
[Digital out delay]:
Adjusts the delay time of the sound output from
DIGITAL AUDIO and HDMI 1 (ARC function)
terminals if the sound does not synchronise the
image.
[Digital out offset]:
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound.
You can set an offset that compensates for the
time necessary for the Home Theatre System to
process the sound of the TV picture.
You can set the value in steps of 5ms. Maximum
setting is 60ms.
●
Only available when Digital out delay set to On
●
To reset the current [Sound Mode] to the default
settings
[Factory settings] in [General settings]
(Settings Menu)
19
English