Advertisement
Quick Links
Manual
Read all instructions and warnings before assembly and use of crib.
sure to check the parts listed are included before assembling this crib.
Care Instruction:
Your crib may be cleaned, using a soft cloth and ordinary metal or
household cleaner. Do not use abrasives or bleach. Wipe dry.
Caution:
Any mattress used in this crib shall be at least 27 ¼ by 51 5/8 in. with a
thickness not exceeding 6 in.
This crib conforms to applicable
r e g u l a t i o n s p r o m u l g a t e d b y t h e
Consumer Product Safety Commission.
This crib meets
Federal Standard: 16 CFR 1219
Date of MFG.
Made in China
Napa crib
Full Size Metal Crib
Product #
FCS-94559
L . A . B A B Y
16039 Loukelton Street
City of Industry, California 91744
Toll free customer service: 800-584-3094
e-mail:
customerservice@lababyco.com
lababyco.com
Be
R
Ins_
FCS-94559_En_
041618
1 of 5
Advertisement
Summary of Contents for L.A. Baby Juvenile Products FCS-94559-GN
- Page 1 Napa crib Manual Full Size Metal Crib Product # FCS-94559 Read all instructions and warnings before assembly and use of crib. sure to check the parts listed are included before assembling this crib. Care Instruction: Your crib may be cleaned, using a soft cloth and ordinary metal or household cleaner.
-
Page 2: Fall Hazard
Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing damaged or broken. Contact “L.A. Baby Juvenile Products”, for replacement parts and instructional literature if needed and DO NOT substitute parts. -
Page 3: Parts List
Napa crib Parts List Full Size Metal Crib Product # FCS-94559 Failure to follow these warnings and instructions could result in serious injury or death. Read all instructions before assembling or using this crib. Keep instructions for future use. Be sure to check that parts listed below are included before assembling this crib. Hardware Tools needed: Hex wrenches and open end wrench (included with hardware) Parts List... - Page 4 Napa crib Crib Assembly Full Size Metal Crib Product # FCS-94559 Note: Only use manual tools to assemble this product. Never use electric tools as this may strip the hardware. Note Before starting step 1 make sure the toddler and day bed side bolt holes are facing each other as illustrated.
- Page 5 Step 3 3 posture board positions Note: Before attaching mattress spring Tip: It is easier to have two people for this step Decide the height position of the mattress support springs. Carefully lower the mattress support springs into the crib, The highest position is for newborns.