Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
RHPL100-HD
Screen Size: 70-100"
Guide Max. Weight: 150kg
Revised 13/12/21
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Summary of Contents for Unicol RHPL100-HD
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
-
Page 2: Tools Required
01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED 3/16 Allen Key Pozidrive Screwdriver 17mm Spanner Rubber Mallet COMPONENTS DESCRIPTION Heavy Duty Base PowaLift Mast Mount Adapter PZX Screen Mount - Back Plate PZX Screen Mount - Mounting Arms CO74 - 7.5cm Castors... - Page 3 01865 767676 sales@unicol.com www.unicol.com Front STEP 1 STEP 2 Connect base to mast as shown using the 6 x M12 For a trolley version, tap castors with the rubber x 35 hex head screws mallet until they lock into place ensuring braked castors are at the front.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 5 (view from front) STEP 6 Fit the mount adapter and fitted screen backplate Using the griplock (top) and taglock (bottom) to the mast by placing fixing screws from the rear spacers fix the mount arms to the screen of the mast through the fixing holes into the adapter fixing holes.
-
Page 5: Lift Operation
01865 767676 sales@unicol.com www.unicol.com STEP 10 STEP 11 With the screen fitted, cable it up by routing from External cables route through either base apertures the 4-way power socket up through the aperture in up the power train to exit at the top of the unit. - Page 6 01865 767676 sales@unicol.com www.unicol.com ACCESSORIES – SOUNDBAR & VC MOUNT STEP 2 (OPTIONAL) STEP 1 (OPTIONAL) With the VCCS assembled hook the top bracket If fitting the VCCS Soundbar & VC Mount locate the over the rail of the PZX screen mount back plate.
- Page 7 01865 767676 sales@unicol.com www.unicol.com ACCESSORIES – GLASS SHELF STEP 2 (OPTIONAL) STEP 1 (OPTIONAL) With the shelf assembled hook the top bracket over Assemble standard or large shelves the same way. the rail of the PZX screen mount back plate. The...