Advertisement
Operator's Manual
CLIMBING SYSTEMS
20'
WE ARE HUNTERS
Connected Stick
MODEL RE730
Maximum Height
20'
Maximum Field Rating
300 lbs
Tree Diameter Range
8" to 20"
Wear Your Harness!
PRODUCT MEETS
INDUSTRY STANDARDS
RECOGNIZED BY
P/N: 28972
Get parts online at
© 2020 RETI
C/N: 28967/29175
www.HuntRiversEdge.com
All Rights Reserved
REV2: 11/17/2020
PARTICIPATING MEMBER
Advertisement
Table of Contents
Related Manuals for TMA Big Foot RE730
Summary of Contents for TMA Big Foot RE730
- Page 1 Operator's Manual CLIMBING SYSTEMS WE ARE HUNTERS Connected Stick MODEL RE730 Maximum Height Maximum Field Rating 300 lbs Tree Diameter Range 8" to 20" Wear Your Harness! PRODUCT MEETS INDUSTRY STANDARDS RECOGNIZED BY P/N: 28972 Get parts online at © 2020 RETI C/N: 28967/29175 www.HuntRiversEdge.com All Rights Reserved...
-
Page 2: Table Of Contents
Operator's Manual CLIMBING SYSTEMS 20' CONNECTED STICK INTRODUCTION Rivers Edge® Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world class trees- tands. Follow these few simple instructions and your stand will provide you many years of trouble-free pleasure. Instructions should be kept in a safe place and reviewed at least annually. -
Page 3: Warnings
Operator's Manual CLIMBING SYSTEMS 20' CONNECTED STICK READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE ASSEMBLY STOP MODEL RE730 WARNING TOTAL WEIGHT LIMIT - 300 LB Pull up a bow, backpack, or firearm or other equipment TREE DIAMETER RANGE - 8" TO 20" only after being secure in the treestand and a firearm must be pulled up with it unloaded, chamber open, and MAXIMUM USE HEIGHT - 20’... -
Page 4: Inspection And Maintenance
Operator's Manual CLIMBING SYSTEMS 20' CONNECTED STICK WARNING INSPECTION AND MAINTENANCE Read and perform all inspection and maintenance tasks before each and every use. Replace any questionable BEFORE EACH USE PERFORM THE FOLLOWING: components immediately with RETI original replacement parts. •... -
Page 5: Assembly Instructions
Operator's Manual CLIMBING SYSTEMS 20' CONNECTED STICK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS SETUP AND USE INSTRUCTIONS Tools Needed - two 7/16" wrenches 1. Stand the assembled climbing stick up against a selected straight tree on dry, level ground. Feed the strap assembly through the 1. -
Page 6: Illustrated Parts Breakdown
Operator's Manual CLIMBING SYSTEMS 20' CONNECTED STICK ILLUSTRATED PARTS BREAKDOWN PARTS LIST KEY # PART # DESCRIPTION QTY. 29054 TOP STICK SECTION 29053 MIDDLE STICK SECTION 29052 BOTTOM STICK SECTION 17558 TREE HUGGER 48153B BOLT 1/4-20 X 2 IN 48261B WASHER 1/4 IN 48752B NUT 1/4-20... -
Page 7: Notes Page
Operator's Manual CLIMBING SYSTEMS 20' CONNECTED STICK NOTES Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5... - Page 8 CLIMBING SYSTEMS WE ARE HUNTERS Rivers Edge® Treestands Phone: 800-345-6007 A Division of Ardisam, Inc. Fax: 715-822-2124 1160 Eighth Avenue, PO Box 755 www.HuntRiversEdge.com Cumberland, WI 54829 *All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Warning labels in some product images may have been removed for photography purposes only.
Need help?
Do you have a question about the Big Foot RE730 and is the answer not in the manual?
Questions and answers