Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Opteev ViraWarn Plus 100
Summary of Contents for Opteev ViraWarn Plus 100
- Page 2 Normal Operatoing Condition ........................8 Overview Congratulations on your purchase of a ViraWarn Plus 100 viral detection system. We thank you, and we are here to support your effective use of the product. This document covers the ViraWarn Plus 100 unit.
- Page 3 2. ViraWarn Plus 100 is intended for indoor use only. 3. ViraWarn Plus 100 should not be used or stored in direct or reflected sunlight. 4. ViraWarn Plus 100 should be operated and stored at temperatures between 50°F - 90°F (10°C - 32°C).
- Page 4 Getting started with ViraWarn ViraWarn Unit Figure 4 P a g e...
- Page 5 Empty the second bottle in the same manner. Discard the empty refill bottle. IMPORTANT: To achieve proper functioning, fill or refill the ViraWarn Plus 100 unit using two (2) refill tubes P a g e...
- Page 6 Getting started with ViraWarn Installation Location and Procedure WARNING: After adding the media, do not tilt the ViraWarn Plus 100 unit. Maximum capacity of the detector chamber is with two refill bottles. Please do not overfill the detector chamber. Your ViraWarn Plus 100 unit comes with a power cord.
- Page 7 Getting started with ViraWarn Device Operation: Place ViraWarn Plus 100 unit on a steady flat surface and power it up by plugging the power cord into a wall outlet. Figure 11 The lights (LEDs) in the front indicate the states of various functionalities of ViraWarn.
- Page 8 Liquid media is below acceptable level or detector chamber is empty. Your ViraWarn Plus 100 unit will automatically turn off its functionality. In this case the detector chamber needs to be refilled by following the steps as mentioned in ‘Adding the Media’.
Need help?
Do you have a question about the ViraWarn Plus 100 and is the answer not in the manual?
Questions and answers