Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Opteev ViraWarn Patriot
Summary of Contents for Opteev ViraWarn Patriot
-
Page 2: Table Of Contents
Getting started with ViraWarn, Model Patriot ViraWarn: Model Patriot Patriot Table of Contents Overview ............................... 2 Safety Precautions ............................3 Unpacking the Box ............................3 ViraWarn: Model Patriot ..........................4 Assembling the Unit ............................5 Adding the Media............................5 Installation Location and Procedure ......................6 Device Operation ............................ -
Page 3: Overview
For any further assistance you can reach out to Opteev support team at +1-443-457-1370 or you can send your queries at support@opteev.com. -
Page 4: Safety Precautions
2. ViraWarn Patriot is intended for indoor use only. 3. ViraWarn Patriot should not be used or stored in direct or reflected sunlight. 4. ViraWarn Patriot should be operated & stored at temperatures between 50°F - 90°F (10°C - 32°C). -
Page 5: Virawarn: Model Patriot
Getting started with ViraWarn, Model Patriot ViraWarn: Model Patriot Figure 4 P a g e... -
Page 6: Assembling The Unit
Figure 5 Adding the Media Remove two refill bottles from the ViraWarn Patriot box (Figure 6). Rotate the cap to open the tube of one bottle/tube (Figure 7). (DO NOT throw away the cap). Invert and insert the bottle through the refill port and hold it a little bit up as shown in Figure 8. -
Page 7: Installation Location And Procedure
Maximum capacity of the detector chamber is with two refill bottles. Please do not overfill the detector chamber. ViraWarn Patriot comes with a power cord. After adding the media, you can power up the ViraWarn Patriot by plugging the power cord into wall outlet as shown in Figure 10. Figure 10... -
Page 8: Device Operation
Getting started with ViraWarn, Model Patriot Device Operation: Place ViraWarn Patriot on a steady flat surface and power it up by plugging the power cord into a wall outlet. Figure 11 The lights (LEDs) in the front indicate the states of various functionalities of ViraWarn Patriot. -
Page 9: Normal Operatoing Condition
Blinking white: Liquid media is below acceptable level or detector chamber is empty. ViraWarn Patriot will automatically turn off its functionality. In this case the detector chamber needs to be refilled by following the steps as mentioned in ‘Adding the Media’.
Need help?
Do you have a question about the ViraWarn Patriot and is the answer not in the manual?
Questions and answers