5.2 The charging station
(1) Charge arms.
(2) Base.
(3) Occupation sensor. This is an optional feature indicating that the charging station is
occupied in charging a robot.
(4) LEDs which indicates the current state of the each wire:
• Green - blinking: wire is operating normally.
• Red - blinking: no peripheral wire can be detected.
This could be because the wire has been cut or that it is too long. Contact a technician.
• Red - steady: indicates a problem.
This could be due to the wire being too short, less than 200m, or there is a problem with
the electronics. Contact a technician.
(5) Identification label.
Big mow BM 2050 User's Manual
Figure 14: Components of the charging station
Figure 15: Rear view of the charging station
Version: Release 4.5.0
Chapter 5 Big mow BM 2050 description
Last updated: 2022-08-20
19