Z690D4U / W680D4U Series
Setup Prompt Timeout
Configure the number of seconds to wait for the UEFI setup utility.
Bootup Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock function after
boot-up.
Boot Beep
Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.
Full Screen Logo
Use this item to enable or disable OEM Logo. The default value is [Enabled].
Boot Failure Guard Message
If the computer fails to boot for a number of times the system automatically restores
the default settings.
Boot Failure Guard Count
Use this item to configure Boot Failure Guard Count.
105