Related Manuals for Magnum Industrial MI-16320
Summary of Contents for Magnum Industrial MI-16320
- Page 1 MODEL NO.: MI-16320、MI-16323 MI-16320 MI-16323 MOTOR 1HP / 110V / 1PH / 12A MOTOR 1HP / 220V / 3PH / 3A OPERATING MANUAL...
-
Page 2: Important Safety Rules
IMPORTANT SAFETY RULES Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery. there are certain hazards involved with the operation of the product. Using the machine with respect and caution will consider- ably lessen the possibility of personal injury. - Page 3 24. DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs. alcohol or any medication. 25. MAKE SURE TOOL IS DISCONNECTED FROM POWER SUPPLY while motor is being mounted, connected or reconnected. 26. WARNING: The dust generated by certain woods and wood products can be injurious to your health. Always operate machinery in well ventilated areas and provide for proper dust removal.
- Page 4 IMPORTANT SAFETY RULES FOR BELT DISC SANDER WARNING: Basic precautions should always be followed when using your disc sander. To reduce the risk of injury, electrical should or fire, comply with the safety rules listed below: 1. WARNING: Do not operate your machine until it is completely assembled and installed according to the instructions.
- Page 5 ADDITIONAL SAFETY RULES FOR 6” x 48” BELT SANDER 1. WARNING. Do not operate your machine until it is completely assembled and installed according to the instructions. 2. IF YOU ARE NOT thoroughly familiar with the opera-tion of Abrasive Finishing Machines, obtain advice from your supervisor, instructor or other qualified person.
- Page 6 GROUNDING 1. In the event of a malfunction or breakdown, grounding provides a path of least resistance for the electric current, to reduce the risk of electric shock. This machine is equipped with an electrical cord that has an equipment grounding con- ductor and a grounding plug.
-
Page 7: Extension Cords
EXTENSION CORDS Extension Cords (North American Only) WARNING: Use of damaged cords can shock, Recommended Minimum Gauge for Cord Extensions for Portable Electric Tools burn or electrocute. Wire Gauge Chart A. W. G. Replace damaged or worn cords immediately. Name Cord Length in eet The table shows the correct size to use, Plate... -
Page 8: Machinery Data
MACHINERY DATA The 6”x 48” Belt Sander is shipped complete in two cartons. Carefully unpack the machine and take all loose items away from the carton. If any parts are missing, do not attempt to operate your sander until the missing parts are obtained and installed correctly. WARNING: For your own safety, do not connect the sander to the power source until the machine is completely assembled and you have read and understood the entire owners manual. -
Page 9: Unpacking Checklist
UNPACKING CHECK LIST WARNING: For your safety, do not connect the sander to the power source uthe maichine is completelt assembled and you have read and understood the entire owners manual. -
Page 10: Assembling Procedure
ASSEMBLING PROCEDURE Assembling Body and Platen Step 1 Take the main body, which have the motor, table, and base away from the carton and place it on a stable working bench. Step 2 Place the platen into the drive roller area by screwing tightly with 4 pieces of M8 x 20L hex bolt. - Page 11 Assembling Idler Roller Cover Lock the idler roller cover at the edge of platen by screwing 2 pieces of M6 x 10L hex. head screw and 1 piece of M6 x 10L polygon knob. Assembling Back Stop Place the platen table on the top of the platen by screwing tightly with 2 pieces of M6 x 16L hex.
- Page 12 Operation Method 1. Curving Sanding: Take off the idler roller cover, then can start to do the curving sanding. 2. Change the platen position: Adjusting the platen to any degree by loosing the 3 pieces of M8 nut. 3. Connect the hose: Before start to operate this machinery, please connect the hose into the dust outlet.
- Page 13 1HP*220V*60Hz*3PH 1HP*220V*60Hz*3PH 1HP*220V*60Hz*3PH 1HP*110V*60Hz*1PH 1HP*110V*60Hz*1PH 1HP*110V*60Hz*1PH...
- Page 14 PARTS LIST FOR MI-16320、MI-16323 PART NO. DESCRIPTION SPECIFICATION PART NO. DESCRIPTION SPECIFICATION MI-16320-01 Motor MI-16320-43 Hex Head Screw M8xl2 1HP*110V*60Hz*1PH MI-16323-01 Motor MI-16320-44 Base 1HP*220V*60Hz*3PH MI-16320-02 Hex Screw M8x25 MI-16320-47 Switch 1HP*110V*60Hz*1PH MI-16320-03 Flange Bolt MI-16323-47 Magnetic Switch 1HP*220V*60Hz*3PH MI-16320-04...