On Screen Display - Status; Nht Speaker Wizard - NHT Xd system User Manual

4. When all of the changes are made, exit the menu by
navigating through the exit links. Pressing the MENU
button on the remote directly exits and saves the settings
from any menu level.

On Screen Display - Status

Pressing the STATUS button on the remote during
normal operation will display the status of the Controller's
Audio and Video assignments on the OSD.
The STATUS screen shows the currently selected
Source in the upper right corner (shown in our example
as DVD). The volume is displayed with a number range
from -90 to +20 (depending on the presets, levels and
tone controls as well as input signals) and a horizontal
line with a volume-tracking indicator that shows the
current volume relative position to the entire volume
range.
Audio Settings show the Signal type (examples: analog
or digital), selected Input jacks used (examples: Analog
1, Coax 2, HDMI) and Mode (examples: Stereo, Pro
Logic IIx Movie). Video Settings show the Input location
and type (examples: Component 1, HDMI 3, Analog 1).

NHT Speaker Wizard

The Controller has every current NHT speaker and
subwoofer model (and some older models too) factory
pre-programmed. This will allow your system to perform
at its very best while eliminating as many as 20 setup
screens and your need to perform the role of speaker
expert. The Wizard automatically sets all the crossover
frequencies and assigns EQ (as needed) to any combi-
nation of NHT speakers!
If you have NHT speakers for some or all of your home
theater setup, your life just got a lot simpler. Answer Yes
to the Wizard's first question and away you go. If you
aren't using any NHT speakers in your speaker setup,
obviously answer No...you will be told to select the
speaker sizes/distances/levels manually. Instructions for
this immediately follow this Speaker Wizard section.
Run the Speaker Wizard again when you decide to
upgrade any speakers in your setup to NHT.
15