Important Safety Instructions - NHT Power2 User Manual

Read These Instructions
•
Keep These Instructions
•
Heed All Warnings
•
Follow All Instructions
•
Water and Moisture - Do not use this product near water. Do not place any objects filled with liquids, such as
•
vases, on top, above or near the apparatus.
Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
•
cleaners. Clean only with dry cloth.
Ventilation - Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
•
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been adhered to.
Heat - Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ
•
ing amplifiers) that produce heat.
Grounding - Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
•
blades with one wider than other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consultant an electrician
for replacement of the obsolete outlet.
Power Cord Protection - Protect the power cord from being walked on or pinched particularly at plug,
•
convenience receptacles, and the point where they exit from the apparatus.
Lightning and Periods of Non-Use - Unplug this apparatus during lightning storms or when unused for long
•
periods of time.
Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to
•
dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as when a power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Accessories - Only use attachments / accessories specified by the manufacturer.
•
Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
•
in a risk of fire or electrical shock.
Power Sources - This product should be operated only from the type of power source indicated on the marking
•
label.
The mains switch - The mains switch located at the rear of the apparatus, is used as disconnect device and
•
shall always remain readily operable during operation.

Important Safety Instructions

3