Advertisement
Assembly Instructions
*Do not tighten screws until assembly is complete*
Step 1: Screw the Wheels (H) into the Table Leg
(1) using the Wrench (J). Connect the Table Leg
(1) and the Middle Bar (2) with four M6x45
Flat-End Screws (E).
E
H
© 2021. EMS Mind Reader, LLC. All Rights Reserved.
Step 2: Unscrew the rotating handles of the Q-
Shaped Clamps (G) and place them over the
Circular Pipe (5). Then connect the Circular Pipe
(5) with the L-Shaped Pipe for Middle Board (3)
using two M6x45 Flat-End Screws (E).
G
E
J
E
3
Step 3: Connect the Q-Shaped Clamps (G) with
the Middle Board (8) and the Mouse Board (9)
using eight M6x12 Flat End Screws (B).
Advertisement
