Alliance Laundry Systems CCN020KNF Programming Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Scrubber
  5. CCN020KNF
  6. Programming manual

Alliance Laundry Systems CCN020KNF Programming Manual

Washer-extractor
Hide thumbs Also See for CCN020KNF:
Table of Contents

Advertisement

Quick Links

Washer-Extractor
Refer to Page 7 for Model Numbers
CHM537R_SVG
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F8238101ENR11
www.alliancelaundry.com
March 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CCN020KNF and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems CCN020KNF

Summary of Contents for Alliance Laundry Systems CCN020KNF

  • Page 1 Washer-Extractor Refer to Page 7 for Model Numbers CHM537R_SVG Original Instructions Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F8238101ENR11 www.alliancelaundry.com March 2017...
  • Page 3 Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 4: Table Of Contents

    Power Save Mode..................13 © Copyright 2017, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 5 Manual Reset..................54 How to Enter Manual Reset................54 Testing Machine and Electronic Control Functions....... 55 How to Enter Diagnostic Testing Feature............55 How to Start Tests..................55 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 6 How to Use Rapid Advance................66 How to Exit Rapid Advance Feature............... 66 Communications Mode................. 67 Infra-red Communications................67 How to Begin Communications with an External Device......67 Default Cycles..................68 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 7: Model Identification

    100 Pound ICN100KNF SCL100KNF UCH100KNF UCN100KNV UCY100KNV ICN100KNV SCN100KNF UCH100KNV UCU100KNF SCH100KNF SCN100KNV UCL100KNF UCU100KNV SCH100KNV SCY100KNF UCL100KNV 125 Pound SCL125KNV SCU125KNV UCL125KNV UCN125KNV UCU125KNV SCN125KNV © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 8: Introduction

    For technical assistance, contact your local distributor or contact: Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, WI 54971-0990 U.S.A. www.alliancelaundry.com Phone: +1 (920) 748-3121 Ripon, Wisconsin © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 9: Preliminary Information

    Preliminary Information About the Control the instructions included with the external device software. Con- tact Alliance Laundry Systems for a list of approved PDAs and other external devices. This control is an advanced, programmable computer that allows the owner to control most machine features by pressing a se- quence of keypads.

  • Page 10: Control Identification

    4. STOP UNLOCK keypad (125 lb. models) or STOP keypad (all other models) 5. START (enter) keypad 6. LED Light 7. LED Status Lights Figure 1 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 11: Display Identification

    During diagnostic testing or manual programming of the control, these digits will display descriptive codes and values (as described in Entering the Manual Mode). © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 12: Machine Operation

    The control enters this mode when a cycle is running. The time remaining appears in the display, the status LEDs are lit and the loading door is locked. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 13: Special Features

    Water Purge Test again to return to remaining cycle time. • Water Leak Detection Test • Drive Software Version Number (Design 2 and 3 models on- © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 14: Opening The Top Cover

    2. Slide top cover forward slightly to move notches away from the pegs on the front of cabinet. CHM1357R_SVG 1. Top Cover Lock 2. Top Cover 3. Top Cover Hinge 4. Peg Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 15: Entering The Manual Mode

    The features in the group cannot be entered. How to Exit Programming Feature Press the #5 (<) keypad until the control returns to Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 16: Programming Control

    Refer to Default Cycles for Cy-- default cycle information Cycle Agitate — — AgIt Agitate Type 1-4* tyPE Agitate Speed (VFD only) ASPd Lo/rEg* Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 17 Compartment #4 (Design 2 on/oFF and 3 models) Supply #1 (Design 2 and 3 on/oFF models) Supply #2 (Design 2 and 3 on/oFF models) Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 18 Design 1: 3 bALr (VFD only) Design 2 and 3: 1 IR Access (Enable/Disable) on/oFF Fahrenheit/Celsius FAHr (Fahrenheit) FAHr (Fahrenheit) t FC CEL (Celsius) Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 19 Auto-Water Leak Detection oFF/0-127 (Cycles) ALd1 (On/Off and cycles) Auto-Water Leak Detection 0-23 ALd2 Hour Auto-Water Leak Detection 127* 0-127* ALd3 Day of Week Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 20 Description Default Value Value Range *Refer to programming section for value definition. **Refer to the Default Cycles for default cycle setting information. Table 1 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 21: Programming Flowcharts

    1. Press START (enter) keypad. “dIAg” - Run diagnostic tests on machine operations. 1. Press START (enter) keypad. Refer to Diagnostic Tests flowchart. CHM1352R_SVG Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 22 “tEnP” - Fill Temperature: “CoLd” = Cold “Uarn” = Warm “Hot” = Hot (35°F - 194°F [2°C - 90°C]) (continued) (continued) (continued) CHM1372R_SVG Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 23 5 = Very High Speed (150) 6 = Ultra High Speed (200) “Cnin” - Program Cycle Time “0” - “255” (in minutes) (continued) CHM1409R_SVG Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 24 “ALd-” - Set the time and frequency that the Hour: control automatically checks the water level. “0” - “23” “ALd3” - Auto-Water Leak Detection Day of Week: “0” - “127” CHM1410R_SVG Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 25 “bAL” (Design 1 Models) Display Test (Design 2 and 3 Models) “d020” - Water Purge Test “PUrg” “d021” - Water Leak Detection Test “Ld” CHM1411R_SVG Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 26 Display Test “dCb” (Design 2 and 3 Models) “bAL” (Design 1 Models) “d020” - Water Purge Test “PUrg” “d021” - Water Leak Detection Test “Ld” CHM1389R_SVG Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 27: Default Cycle Dcyc

    The next option, AUd , will appear in the display. NOTE: To program AUd (Audio Signal), refer to Audio Signal AUd. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 28: Audio Signal Aud

    Audio Signal (AUd) Chart Coin/Card In- Remove Card put (Not Start Mode (Not Used) Used) Signal Value (Not Used) End of Cycle Key Pressed Table 2  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 29 Coin/Card In- Remove Card put (Not Start Mode (Not Used) Used) Signal Value (Not Used) End of Cycle Key Pressed *Factory default setting Table 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 30: Error Code Programming Err

    It will also light the right-most Unbalance Error Display (VFD models on- E Ub decimal point on the display. Table 3 Table 3  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 31 Programming Control Day(s) of the Week Enabled Values Day Of Week Value THUR Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 32 Programming Control Day(s) of the Week Enabled Values Day Of Week Value THUR Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 33 Programming Control Day(s) of the Week Enabled Values Day Of Week Value THUR Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 34 Programming Control Day(s) of the Week Enabled Values Day Of Week Value THUR Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 35 Programming Control Day(s) of the Week Enabled Values Day Of Week Value THUR 127* *Factory default setting Table 4 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 36: Cycle Programming Cy

    Cycle Segment programming op- tions can’t be accessed. 4. Press the START (enter) keypad when the desired Cycle Seg- ment programmable option appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 37 HI = High FLEU nEd = Medium Lo = Low 1-30 Fill Temperature CoLd = Cold tEnP UArn = Warm Hot = Hot (35°F-194°F [2°C-90°C]) Table 6 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 38 = Option Disabled press the #3 (∧) or the #6 (∨) keypads and refer to the appropriate section. NOTE: Drain must be enabled to activate Extract step. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 39 NOTE: Programming display time (in minutes) does not actually change time in the cycle, only to the displayed cycle time for the user. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 40 NOTE: To program another cycle, repeat Cycle Pro- gramming steps. To program other options, press the #3 (∧) or the #6 (∨) keypads and refer to the ap- propriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 41: Supply Compartment Dispenser Programming Supc (Design 1 Models Only)

    The current value will appear in the display. 5. Press the #3 (∧) or the #6 (∨) keypad to increase or decrease the current value. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 42: Fahrenheit/Celsius T Fc

    FH, will appear in the display. NOTE: To program FH (Hot Water Temperature), re- fer to Hot Water Temperature FH. To program other op- tions, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 43: Hot Water Temperature Fh

    4. When FHC appears in the display, press the START (enter) keypad. A number will appear in the display. This number corresponds to the current Warm Water Temperature value. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 44: Cold Water Temperature Fc

    3. Press the #3 (∧) or the #6 (∨) keypad to scroll through the pro- grammable options until Codn appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 45: Production Test Cycle (Enable/Disable) Pten

    = Option Enabled (default setting) oFF = Option Disabled 5. Press the #3 (∧) or the #6 (∨) keypad to change the current status. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 46: No Cycle Time Display Nctd

    6. Press the START (enter) keypad when the desired status ap- pears in the display. The next option, SdAd, will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 47: Slow Drain Detection Adjust Value Sdad

    The next option, rtC-, will appear in the display. NOTE: To program rtC- (Set Real-Time Clock), refer to Set Real-Time Clock rtC-. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 48: Set Real-Time Clock Rtc

    NOTE: To program dAEn (Manual Diagnostics [Ena- ble/Disable]), press the #5 (<) keypad and refer to Manual Diagnostics (Enable/Disable) dAEn. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 49: Manual Diagnostics (Enable/Disable) Daen

    10. The default Low Water Level value is 3. 6. Press the START (enter) keypad when the correct number ap- pears in the display. The next option, FnEd, will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 50: Medium Water Level Fned

    NOTE: To program tCF (Temperature Controlled Fill), refer to Temperature Controlled Fill Enable/Disable tCF. To program other options, refer to the appropri- ate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 51: Temperature Controlled Fill Enable/Disable Tcf

    NOTE: To program ALd- (Auto-Water Leak Detec- tion), refer to Auto-Water Leak Detection ALd-. To pro- gram other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 52: Auto-Water Leak Detection Ald

    The next option, dCyC , will appear in the display. NOTE: To program dCyC (Default Cycle), refer to De- fault Cycle dCYC. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 53: Collecting Audit Information

    3. Press the START (enter) keypad again. The control will go to the next audit option in the Audit Options List. 4. To select other audit options, repeat steps 1–4. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 54: Manual Reset

    3. Press the START (enter) keypad. The control will be blank until the programming is complete. Once the program has been reset, the control will display the next Manual Mode op- tion, dIAg. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 55: Testing Machine And Electronic Control Functions

    Show Fill Time Test d011 Fxxx Show Drain Time Test d012 dxxx Temperature Sensor Display Test xxxF or xxxC d013 Start Pulse Test d014 Stxx Table 13  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 56 Drive Parameter Table Version Number d023 (Design 2 and 3 models only) dPxx Drive Type Value d024 (Design 2 and 3 models only) dt x Table 13 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 57: Diagnostic Test Descriptions

    How to Enter Diagnostic Testing Feature at the beginning audit and save the date/time for every opening of the test. of this section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 58 To start test, control must be in the Diagnostic Testing Mode. Re- fer to How to Enter Diagnostic Testing Feature at the beginning of this section. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 59 On Design 2 and 3 models, if water level is higher, indicating a leak in the fill valve, control will display FAIL, water will drain, © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 60 Design 2 and 3 models only. Drive Parameter Table Version Number xx is the drive parameter table version dPxx number. Design 2 and 3 models only. Table 16  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 61 SP 4 (VFD models) or SPIn (2 speed models) Extract Speed #5 “very high” This step skipped on 2 speed and F-speed SP 5 models. Table 16  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 62 Test Cycle Step Comments Extract Speed #6 “ultra high” Design 2 and 3 models only. SP 6 End of Test Turn power off. Prdn Table 16 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 63: Error Codes

    Machine not drained within 15 minutes (or other programmed E dr length of time) in any drain step. End cycle. Power down ma- chine to clear. Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 64 Power down, verify H3 on drive and tachometer connections on motor, power up and try again. Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 65 *To clear the decimal point on display, press the START (enter) keypad 3 times in succession (within 5 seconds). **Design 2 and 3 models only. Table 17 © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 66: Rapid Advance Feature

    NOTE: The Manual Rapid Advance option must be turned on for Rapid Advance to work. Refer to Manual Rapid Advance (Enable/Disable) rAEn in Programming Con- trol. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 67: Communications Mode

    EIxx (xx represents the error code). NOTE: The Infra-red Communications option must be turned on. Refer to IR Access (Enable/Disable) IrA in Pro- gramming the Control. © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

  • Page 68: Default Cycles

    C1, C2 (S1) Heat (if enabled) Drain Spin (min.)(spin speed) Wash 3 (ON/OFF) Time for agitation (min.) Fill Temperature Cold Cold Fill Level High Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 69 C1, C2, C3 C1, C2, C3 C1, C2, C3 Heat (if enabled) Drain Spin (min.)(spin speed) Rinse 2 (ON/OFF) Time for agitation (min.) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 70 C4 (S3, S4) C4 (S3, S4) C4 (S3, S4) C4 (S3, S4) C4 (S3, S4) C4 (S3, S4) Heat (if enabled) Drain Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 71 Normal Normal Wash 1 (ON/OFF) Time for agitation (min.) Fill Temperature Warm Cold Warm Warm Warm Warm Warm (40°C) (40°C) (40°C) (40°C) (40°C) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 72 C1, C2, C3 C1, C2, C3 C1, C2, C3 C1, C2, C3 (S2) (S2) Heat (if enabled) Drain Spin (min.)(spin speed) Wash 4 (ON/OFF) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 73 C1, C2, C3 Heat (if enabled) Drain Spin (min.)(spin speed) 1 (High) 1 (High) 1 (High) 1 (High) 1 (High) 1 (High) Rinse 3 (ON/OFF) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 74 00:32:50 00:32:50 00:30:50 00:30:50 (hh:mm:ss) speed (De- sign 1) F and V- 00:56:02 00:25:32 00:33:02 00:33:02 00:33:02 00:31:02 00:31:02 speed (De- sign 2 and 3) © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 75 Fill Level High High Supply C1, C2, C3 C1, C2, C3 C1, C2, C3 C1, C2, C3 Heat (if enabled) Drain Spin (min.)(spin speed) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 76 C1, C2, C3 C1, C2, C3 Heat (if enabled) Drain Spin (min.)(spin speed) 1 (High) 1 (High) 1 (High) 1 (Low) Rinse 3 (ON/OFF) Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...
  • Page 77 00:00:20 Time (hh:mm:ss) F and V-speed 00:30:50 00:30:50 00:30:50 00:26:50 00:00:20 (Design 1) F and V-speed 00:31:02 00:31:02 00:29:32 00:25:32 00:00:32 (Design 2 and 3) © Copyright, Alliance Laundry Systems LLC - Part No. F8238101ENR11 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Ccn020knvCcn080knvIcn020knfIcn020knvSch020knfSch020knv ... Show all

Table of Contents