arantee
07
Reference time
Reference time
Ronda_5130.D_bauhaus_aviation.indd 27
Ronda_5130.D_bauhaus_aviation.indd 27
A
0 4
I
II
III
B
A
0 4
I
II
III
B
A
0 4
I
II
III
before the desired alarm time.
Once the set alarm time has been reached,
a signal is emitted for 20 seconds.
This signal is repeated after two minutes.
Following brief pressing of the push-button B,
the signal is immediately switched off.
Setting the reference time
P ull out the crown to position III
(second hand stops.
The display changes
from alarm time to reference
Activating the setting mode
Press the push-button B for at least
2 seconds. As soon as the
hand
jumps forwards one minute, this
mode is active.
Short pressing (less than 1 second):
the reference time is moved forwards by
the minute.
Medium pressing: (1–2 seconds):
the reference time is moved forwards by
the hour.
Long pressing (longer than 2 seconds):
the reference time is moved forwards until
the push-button is released.
Push the crown back into position I
(the display changes from reference time
to alarm time).
A 1 beep signal indicates that the alarm
is switched off.
time.)
small minute
27
07.11.2022 09:57:29
07.11.2022 09:57:29
die Verk
Informat
nehmen.
Besc
Anzeig
Minute
Datum
Stunde
Minute
Stunde
Sekund
Alarm
(Stund
Sekund
Datum
01
Mult
Im Kali