iSNATCH TimeCAM Quick Manual page 26

Hour Settings
• Press "MODE" to enter the clock setting, the minutes will flash, then press
"UP" and "DOWN" to set the time (hours and minutes).
• Press "MODE" to finish the time setting.
Alarm Settings (max 3)
• Press and hold the "UP" key (> 2 seconds) to enter the alarm setting,
then press "UP" and "DOWN" to set the alarm time (hours and minutes).
• Press the "MODE" button to finish setting the alarm.
• To delete alarms, press and hold the "DOWN" key (> 2 seconds)
ADJUST THE BRIGHTNESS OF THE LED DISPLAY
• Press "MODE" and hold for 2 seconds, then release it, the brightness
will be adjusted (3 levels total).
• Press "MODE" for 5 seconds to shut down the LED display. Press any
one of "MODE" ,"UP" , "DOWN" to turn on the LED display.
Declaration of conformity
The company KON.EL.CO. S.p.A. (P.za Don Mapelli, 75, 20099 Sesto San Giovanni, MI)
as the manufacturer, declares under sole responsibility that the product Brand iSnatch
type: TimeCAM – Wi-Fi clock camera cod. 67.3794.12, referenced in this manual, com-
plies with the essential requirements of Directives 2014/35/EU, 1999/5/EC, 2011/65/EU.
Due to the continuous evolution of products, features and design of
this model may vary without notice
KON.EL.CO. S.p.A. – P.zza Don Enrico Mapelli n. 75 – 20099 Sesto S. Giovanni – MI – Italy (www.gbconline.it)
Made in China
- 26 -