Configure Device - iSNATCH TimeCAM Quick Manual

4.Plug in the power adapter
5.Please switch it from off to on.
6.Wait for 60 seconds after plug in, the device is active when you hearing 3
sounds of Dong.
WARNING
• Make sure to use the adapter provided to power the device
• The battery needs charge for 5 hours.
• The device can work 2-3 hours when the battery is fully charged.
• Please remove the adapter in thunderstorm to avoid the possible damage.

CONFIGURE DEVICE

Open the App of Lizvie. Make sure your smart phone is connected to router
before the configuration.
1) Click +
- 16 -