NEC N411I - MANUAL 2 User Manual page 89

Device list icons
The following icons will be displayed in the device list screen.
Indicates the device is not registered.
Indicates the device is a phone
While using the Bluetooth device, the following icons will be displayed in the status bar area of your phone.
Indicates that Bluetooth device is set to on.
Using your phone as Bluetooth modem
For details of dial-up connection settings, consult your Internet service provider.
☛
Pair the Bluetooth device and your phone beforehand (see "Pairing a Bluetooth device and your phone" on page 73).
☛
➔
8 9 1 1 to toggle to Bluetooth On to activate Bluetooth
☛
To end the dial-up connection, disconnect from the PC application
You can also end the dial-up connection by pressing
Connecting Bluetooth headset/hands-free kit
When connecting a wired headset and Bluetooth headset at the same time, the wired headset will not work.
For some Bluetooth devices, the voice recall function may be activated when a paired headset/hands-free kit is turned on (see "Voice recall" on
page 8).
☛
Pair the Bluetooth device and your phone beforehand (see "Pairing a Bluetooth device and your phone" on page 73).
☛
➔
8 9 1 1 to toggle to Bluetooth On to activate Bluetooth
☛
8 9 1 ➔ 3 to display the Device list screen
Using Bluetooth headset/hands-free kit
☛
To answer the incoming call, press the button on the headset/hands-free kit
☛
To switch the headset/hands-free kit call to your handset call during a call,
You cannot deactivate Bluetooth during a call.
☛
To end the call, or end from the headset/hands-free kit
Indicates the device is an audio (a headset
or handsfree device).
Indicates the device is other than an audio,
PC, or phone.
Indicates that Bluetooth device is in operation.
➔
Perform dial-up connection by your PC
8 9 1 6
➔ Highlight the headset/hands-free kit in the list
Indicates the device is a PC.
Indicates the device is protected.
➔ SK1
9
75
Bluetooth (M891)