Settings (M1); Phone (M11) - NEC N411I - MANUAL 2 User Manual

Settings (M1)

Phone (M11)

☛
1 1
No. Phone
1 Voice Adjusts the sound volume output from the earpiece.
volume
☛
Use ▲ ▼, Side keys or alphanumeric keys (0 to 9) to adjust the volume.
You can also press the Side keys to display the volume control screen and to adjust the volume setting.
During a call, you can press the Side keys to adjust the setting of the volume as required.
When you change this setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
While using a Bluetooth headset, you cannot change the volume.
2 Answer 1 Any key
options answer
2 Ring silencer
3 Fold answer
3 Side key Disable: Side keys are locked while your phone is folded.
You can also lock/unlock the Side keys by pressing and holding
4 ALS setup
The Alternate Line Service (ALS) facility is SIM card and network dependent.
If your SIM card supports ALS, you can setup which line to use for Outgoing call or Voice mail.
5 Clock 1 Show clock
2 Set time
3 Set date
4 Set date format Selects the date display format.
5 Set time format Selects the time display format from 12 hour or 24 hour.
6 Set timezone
7 Set start day
Settings (M1)
20
On: Any key (except , SK2, the Side keys) is valid to answer a call.
Off: Only and SK1 are valid to answer a call.
On: Pressing one of the Side keys stops the ringer sound and the vibrator while receiving a call with the phone closed.
This function cannot be used if the Side keys are locked.
On: You can answer an incoming call by opening your phone.
Sets to display the local time, both the local and remote times or no time on the main-LCD.
Sets the time for the local or remote time.
Sets the date.
Sets the timezone. (A ✔ is placed on the currently selected timezone.)
☛
Highlight the required timezone
If the highlighted timezone has Daylight Saving, a check box will be displayed at the bottom of the screen.
to activate (✔)/deactivate the setting.
Selects whether to start the week on Sunday or Monday.
This setting affects the functions related to the day of the week, such as Scheduler. (See "Scheduler
(M84)" on page 67 for details.)
on the standby screen.
➔ SK1 to save the change.