NEC e949 User Manual page 38

For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
When you change any volume setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No. Phone mode setting
1 Ringer
2 Ringer volume
3 SMS tone
4 SMS tone volume
5 MMS tone
6 MMS tone volume
7 Key tone
8 Service tone
9 Alarm volume
0 Vibrator
Earphone setting
# Auto answer
Settings (M1)
24
Selects the Sound, Video or MP3 for incoming calls. (See "Sounds (M62)" on page 60, "Videos (M61)" on page 60
or "MP3 (M64)" on page 63 for details.)
If the Video is set, it will sound and will be displayed regardless of the CLI picture/video setting for the personal
data in Phonebook. (See "Allocating a picture or video as a CLI" on page 51.)
Sets the sound volume for incoming calls.
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired
headset and the speaker of the phone are saved individually.
While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker of
the phone is used.
Selects the ringtone for incoming SMS messages. (See "Sounds (M62)" on page 60 for details.)
Sets the sound volume for incoming SMS messages.
Selects the ringtone for incoming MMS or Email messages. (See "Sounds (M62)" on page 60 for details.)
Sets the sound volume for incoming MMS or Email messages.
Turns on/off the key tone.
Turns on/off the service tone.
Sets the sound volume for Clock alarm and Schedule alarm.
Turns on/off the vibrator function.
Selects the sound output from Earphone & Speaker or Earphone.
This option affects the wired headset.
Selects whether to answer an incoming call automatically.
To use the Auto answer function, connect the headset to your phone and set the earphone volume to 1 or higher.
If the earphone volume is set to 0, you must turn the vibrator ON to use the Auto answer.
The Auto answer function only applies to the first incoming call. When you have another incoming call, you have
to answer it manually.