NEC e373 User Manual page 22

2. Connect the charger with the power supply when the e373 is shut off, the screen
will display "charging". In case of charging when turning on, the battery icon will
flash with the voltage grids rising, the e373 operates normally. During charging,
the Illumination is light all the while, and the light coloris red.
3. After charging, the battery prompt icon will not flash, and the Illumination will not
be light; In case of charging when turning on, the screen will display "charging
completed".
4. Disconnect the charger from the power supply and e373.
5. Please adopt the charger approved by e373 manufacturer, and refer to charger
manual prior to use.
SIM CARD AND BATTERY < START-UP
17