Advertisement
4.6 NORMAL USE. Place the delivery nozzle in the fuel tank of the vehicle.
4.7
Attach the red battery clamp to the positive (+) terminal of the vehicle’s battery, and the black clamp to the negative (-) terminal.
4.8
Before turning the pump on, be sure that the delivery nozzle is in the ‘OFF’ position.
4.9
Move the switch lever to the ‘ON’ position. The pump is capable of operating with the delivery nozzle closed for only 2-3 minutes maximum.
4.10 Grip the nozzle firmly and squeeze the trigger to begin transferring fuel.
4.11 Release the trigger to stop the fuel flow when the transfer is complete. (On an automatic delivery nozzle, simply turn the pump switch to off)
4.12 Turn the pump switch ‘OFF’.
The fuel pump may switch off automatically if there is insufficient voltage or a fault in the electrical connection. If this happens, release the
trigger handle, keeping the nozzle in place, and turn the pump switch off. Investigate the cause of the interruption.
5.
PERFORMANCE
CONDITION
DELIVERY
(l/min)
BY-PASS
0
MAX BACK
60
PRESSURE
MAX DELIVERY
85
Environmental conditions:
Temperature: -20ºC / +60ºC
Performance Data given is for the transfer of diesel fuel at 20°C. The conditions indicated are as follows:
By-Pass - The pump operates in this mode when the delivery is closed and the internal by-pass valve automatically opens.
5.1
The pressure indicated is constant regardless of the type of delivery systems. Note that the unit can only operate in this condition
for a maximum of 2 to 3 minutes.
Maximum Back Pressure - These values are given for the maximum back pressure allowed with the by-pass valve closed.
5.2
Higher back pressures will cause the by-pass valve to open and reduce delivery volume. The back pressure should not exceed the value
given during normal operation.
5.3
Maximum Delivery - These values indicate the lowest back pressure and greatest delivery volume possible at once.
6.
TROUBLE SHOOTING
6.1
BACK PRESSURE
(bar)
1.3
1.2
0.4
Max Relative Humidity: 90%
Model TP98
Pump power . . .12 Volts (35 Amps, 240 Watts).
Fuse . . . . . . . . .40 Amps.
Duty cycle . . . . .30 minutes
Speed . . . . . . . .2000rpm
Model TP9824
Pump power . . .24 Volts (18 Amps, 240 Watts).
Fuse . . . . . . . . .30 Amps.
Duty cycle . . . . .30 minutes
Speed . . . . . . . .2000rpm
TP98 TP9824 - 4 - 081204
Advertisement
