NEC WT610E Installation Manual

WT610E Installation Guide
Desktop and Ceiling Mount
Contents
Product Description, Lens Specs, Notes and Formulas
Diagrams and Distance Charts
Ceiling Mounted Installation
Desktop Setup
Cabinet Dimensions
Top, Front and Right Side
Bottom, Back and Left Side
Optional Ceiling Mount Dimensions
Optional Wall Mount Dimensions
Optional Wall Mount Dimensions cont.
Input Panel and Control Codes

Product Description

Type: 1 chip DMD
4 mirror bounce optical system
Native Resolution: 1024 x 768 (1024x576 for 16:9 screens)
Brightness: 2000 lumens (1500 ANSI)
Power Consumption: 370W (max)
Screen/Aspect Ratio_
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
•
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
•
All calculations are based on 4:3 aspect ratio.
•
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
•
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for "W" in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions:
W = Screen width
H = Screen height
B = Vertical distance between projector foot and screen center
C = Throw distance
D = Vertical distance between projector foot and screen bottom
(screen top for ceiling mounted application)
Projection Formulas:
B = 0.6882W + 3.935
C = 0.4874W - 13.056
D(4:3) = 0.3132W + 3.935
D(16:9) = 0.407W + 3.935
Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of
the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the "Screen" menu. The range of Vertical
Position is dependent on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of vertical position is
+/-0.167H (H=Screen Height) when using a 16:9 screen. (See "Screen Type" and "Position" in user manual)
www.necdisplay.com
TM
Lens-less projector
NEC Display Solutions of America, Inc.
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Dimensions: 15.0"(W) x 12.3"(H) x 12.3"(D) w/final mirror up
Weight: 14.1 lbs
Screen Range: 40" - 100" Diagonal (4:3)
Fan Noise: 37 dB / 32dB @ 1 meter
BTU's: 1262 BTU/hour
4:3 Screen Formulas:
W = H x 4/3
H = W x 3/4
Screen Diagonal = W x 5/4
16:9 Screen Formulas:
W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.358/16
WT610E Page 1 of 9
v2.4